Loading the content...
Navigation
Account
Cart 0 items for $0.00

No products in the cart.

Aluma Glow Protective Clear Coat for Metals

Return to Previous Page
Description

Description

Aluma Glow offers long-term protection for metals against oxidation and pitting of anodized aluminum, aluminum, stainless steel, chrome, and painted metals.

Related Products

45 inch Bow Pulpit with Anchor Hole Quick View

Bow Pulpit – 45 Inch with hole

This top quality fiberglass anchor pulpit is built to exacting specifications and will fit almost all bow configurations. Proudly Made in the USA The skirt all the way around the bottom of the pulpit can be cut to match the toe rail or angle of the deck on your boat in order to make a seamless appearing installation.
  • This product has a built in non-skid surface.
  • It keeps the anchor away from the deck of boat and the section that is narrow, where the shank of the anchor goes, is 4 3/4"L x 3"W.
  • The front bow opening is 4 1/8" and back of opening is 5 1/4"W x 8 1/2"L.
  • Weight appx. 42 pounds
  • Approximate thickness is 3 inches.
  • 12"Wide x 45"Long
NOTE: These are semi-custom items and are not in stock on the shelf. They are usually built and in the mold ready to take out, finish, and ship. Depending on the number of orders for the pulpits and other fiberglass items, shipping could take 1-2 weeks.  This item can not be shipped outside the Continental United States.  
$419.95 Add to cart
15 inch flush mounted pull up cleat Quick View

15 Inch Pull Up Cleat

THE LARGEST FLUSH-MOUNTED CLEAT AVAILABLE! FEATURES:
  • The largest flush-mounted cleat available!
  • Made of marine grade 316 stainless steel.
  • Available in both stud mount and through-bolt versions.
  • Stud length is 4" on part # 115-15-S.
  • Each cleat is supplied with a waterproofing cup(shown).
INSTALLATION
  • Each cleat is shipped with a backing plate which also serves as the cut-out template.
  • Fasten with four 3/8" diameter screws (not included),weight = 16 pounds each.
Available with visible screw holes as PN 115-15 (load of 61,000 pounds), or with studs on the underside of base as PN 115-15-S (load of 31,000 pounds). Shipping weight 19# Proper maintenance consists of rinsing with fresh water regularly, and following each exposure to salt water. Stainless steel surfaces should be periodically wiped with a clean, soft cloth. Plastic surfaces may be cleaned with a mild, non-abrasive detergent solution, then rinsed with fresh water as necessary.  
$755.00$759.00 Select options
49 inch Anchor Pulpit Quick View

Bow Pulpit – 49 Inch

This top quality fiberglass anchor pulpit is built to exacting specifications and will fit almost all bow configurations. Proudly Made in the USA The skirt all the way around the bottom of the pulpit can be cut to match the toe rail or angle of the deck on your boat in order to make a seamless appearing installation. NOTE: These are semi-custom items and are not in stock on the shelf. They are usually built and in the mold ready to take out, finish, and ship. Depending on the number of orders for the pulpits and other fiberglass items, shipping could take 1-2 weeks. 2" high x 16" wide x 49" long
  • Weight appx. 40 pounds
  • Approximate thickness is 2 1/5 to 2 3/4 inches.
This item can not be shipped outside the Continental United States.  
$379.95 Add to cart
Sale! KeepAlive® Basic Through Hull System Quick View

KeepAlive® Basic Through Hull System

"The Basic" Thru Hull Oxygen Infusor®  will allow the innovative fishermen to design a flow-thru livewell system to fit their individual needs. If you have a livewell system in place, then all that needs to be done is to replace the thru hull pump with "The Basic" Thru Hull Oxygen Infusor® . For tips on installing your live well, Click Here. Refurbish or build your system with KeepAlive® ....The Superior Technology!
$89.95$99.95 Select options
Quick View

Bow Pulpit – 33 Inch

This top quality fiberglass anchor pulpit is built to exacting specifications and will fit almost all bow configurations. Proudly Made in the USA The skirt all the way around the bottom of the pulpit can be cut to match the toe rail or angle of the deck on your boat in order to make a seamless appearing installation. NOTE: These are semi-custom items and are not in stock on the shelf. They are usually built and in the mold ready to take out, finish, and ship. Depending on the number of orders for the pulpits and other fiberglass items, shipping could take 1-2 weeks. 33in long x 11in wide at the bow x 3in thick
  • Tapers to approximately 7 1/2 wide at the end
  • Weight 18 pounds
  • Approximate thickness is 2 1/5 to 2 3/4 inches.
This item can not be shipped outside the Continental United States.  
$269.95 Add to cart
Poli Strip Liquid Quick View

Poli Strip Liquid

32oz. Poli Strip Liquid Concentrate is formulated for the removal of Poli Glow. Rubbing compound will not remove Poli Glow!! If Poli Glow has started to break down and is coming off, you may have to remove Poli Glow with Poli Strip (see 'More Information' for removal of Poli Glow.) Reapply 2 to 3 coats of Poli Glow to the area to restore shine.  
$22.95 Add to cart
Captain Charlie's Rough Water 31" High Center Console Quick View

Captain Charlie’s Heavy Seas 31″ Center Console

Center Console 31 Inches High (RWCC02) Made in the USA with pride Captain Charlie’s™ Heavy Seas Products are not your everyday cookie cutter products that you see in many marine stores. They are high end, high quality, yet affordable products that have been missing from the market. We take great pride in the quality of all our products and Captain Charlie’s™ Heavy Seas leads the pack in quality construction. 31"H x 23"W x 22"D
$479.95 Add to cart
Captain Charlie's Rough Water 27 inch high center console Quick View

Captain Charlie’s Heavy Seas 25″ Center Console

Center Console 25 Inches High (RWCC01) Made in the USA with pride Captain Charlie’s™ Heavy Seas Products are not your everyday cookie cutter products that you see in many marine stores. They are high end, high quality, yet affordable products that have been missing from the market. We take great pride in the quality of all our products and Captain Charlie’s™ Rough Water leads the pack in quality construction. 25"H x 21"W x 16"D
$449.95 Add to cart
KeepAlive Floater 500GPM Quick View

Portable Bait Well Pumps, “The Floater”

"The Floater" is the most versatile aerator in our KeepAlive® Oxygen Infusor®  family of products. The Floater, while still running, it can be lifted and removed for easy bait selection. Don't let your fishing trip end before its time just because your bait did! Make "The Floater" from  Boaterscatalog.com a part of your fishing gear! Operates on 12 volts dc. Draws less than 1 amp! REMEMBER THIS TIP: BROWN LEAD MUST GO TO POSITIVE POLARITY AND BLACK TO NEGATIVE POLARITY OR IT WON'T MAKE BUBBLES!!!
$54.95 Add to cart
Lewmar Pro-Fish Anchor Windlass Quick View

Windlass Service, Spares and Parts

Windlass Service, Spares and Parts We carry parts for Lewmar, Horizon, Sprint, Simpson Lawrence, James Neilssen, Maxwell, and Quick. If you need parts or service on your windlass, call us at 800-745-0765, Monday - Friday 8 am - 5 pm EST.
Back to top