Product Information
Product code: Z-0-IDP-fndrbrac Categories: Maintain or improve your dock, Dock Fenders, Dock UpgradesAffordable Aluminum Fender Brackets from Boaters Catalog.
When pilings are not available for mounting fenders, aluminum fender brackets serve as a cost-effective solution. These brackets offer a more visually appealing alternative to installing pilings while providing the necessary protection for your vessel. The standard channel width of 4 inches accommodates 4×4 lumber, and standard sizes include one foot and three feet. Additionally, custom lengths are available. For larger vessels, it is recommended that the fenders do not extend above or below the braces more than 12 inches, unless supported by a bulkhead or lower piling. For mid-sized to smaller vessels, the standard mount should not extend more than 4 feet above or below the mounting point, and additional support may be required.
Call us for a price quote on the braces you need at 1-800-745-0765
See all our quality dock products here.
Description
Aluminum Fender Brackets
Please call us for a price quote for your Aluminum Fender Brackets.
They range from $138.75 for a one foot bracket to $243.60 for a seven foot bracket.
Related Products
Finger Pier Lift Ladder
Captain Charlie's Wide Tread Finger Pier Lift Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto the dock.
4" wide step
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread finger pier lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Flip Up Ladders
Our quality Flip Up Ladders from Boaters Catalog come completely out of the water so no algae or or other growth can occur when not in use.
- Marine grade aluminum construction
- Heavy duty uprights(.060)
- 304 stainless steel fasteners
- Proprietary quick disconnect hardware included(not shown)
- Non-skid steps & square tube
- Flip it up and out of the way
- Stair tread style Flip-It Ladder
Note: Proprietary quick disconnect hardware with this ladder consists of a pair of tie-down eye straps that bolt to the dock and the ladder has connectors that go under the eye straps to hold it in place.(This is NOT the Captain Charlie's quick disconnect that is shown with the Captain Charlie's pipe style ladders)
There may be a lead time on these ladders from the manufacturer.
Shipping will be quoted by e-mail or telephone after order is placed or you may call 800-745-0765.
Two Leg Fish Cleaning Table
Our Two Leg Fish cleaning Table are constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel. (40 inch table not shown)
Freight to be quoted after order or call 800-745-0765
There is a 4-5 week lead time on tables.
Dock Lift Ladder
The Dock Lift Ladder from Boaters Catalog is an innovative, retractable ladder featuring a new and improved heavy-duty rung hangar. To extend the life of the ladder, simply pull up the lower section above the water line to eliminate marine growth.
The plastic coated lift cable will provide long lasting service.
Available in 3, 4, 5, 6, and 7 step.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Floating Dock Lift Ladder
Captain Charlie's Floating Dock Lift Ladder from Boaters Catalog has a fixed portion that extends only 14-1/2inches down from the top of the dock. This means that a 7 step ladder hangs down only 6 feet, a 6 step ladder hangs down only 5 feet etc. All our other ladders extend down the same number of feet as steps.
The Floating Dock Ladder has "Hoop Handles" and can be used with our "Quick Disconnect" option.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Dock Cleats
Our high quality Dock Cleats from Boaters Catalog are the best "S" cleats you can buy.
- High quality cast aluminum for corrosion resistance
- Magnesium for Strength
- Large "footprint" for maximum holding strength.
- Recessed bolt area
- Fully guaranteed against breakage.
- Corrosion resistant - no ugly stains.
- Three sizes available (10", 12", and 15") for different size vessels.
- Powder Coating is an available option
Wide Tread Straight Ladder
Captain Charlie's Wide Tread Straight Ladder from Boaters Catalog is perfect for seawalls and stationary docks with fluctuating water lines, makes climbing in and out of the water a breeze.
4" wide step
The variety of lengths will accommodate most installations.
Each step is one foot.
Capacity is 500+ lbs.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
See all our quality ladders here.
Fiberglass Fish Cleaning Station
Captain Charlie's Fiberglass Fish Cleaning Station from Boaters Catalog is constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and powder coated for a clean finish. All fasteners are 316 grade stainless steel.
(Some of our images show optional add-ons such as hose holders, water bibbs, oval sink and drain, 110 GFI Duplex power outlet. Call 1-800-745-0765 for options pricing.)
This unit comes standard with knife, plier and drink holder
There is an 11-15 week lead time for all fiberglass at this time.
Floating Dock Lift Ladder
Captain Charlie's Wide Tread Floating Dock Lift Ladder from Boaters Catalog has a fixed portion that extends only 14-1/2inches down from the top of the dock. This means that a 7 step ladder hangs down only 6 feet, a 6 step ladder hangs down only 5 feet etc. All our other ladders extend down the same number of feet as steps.
The Floating Dock Ladder has "Hoop Handles" and can be used with our "Quick Disconnect" option.
4" wide step
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread floating dock lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Hose Stands
There quality Hose Stands with Hose Holders and Faucets from Boaters Catalog will withstand the weather in both fresh and salt water usage an will help to keep you dock safe from tripping hazards.
- Extruded marine grade aluminum stanchion 3” X 3” with Almag 35 cast aluminum hose holders
- Powder coated white
- Standard height: 29”
- Standard Base Plate: 5 ½” x 5 ½” with 3/8" mounting holes
- When hose bibb is installed the water line fitting is inside the stand for your water connection