Important Information...
Online Policies
International Sales
Shipping and Returns
Your Privacy Matters
Talk to Us!
Description
Description
Minnow Fin For Trolling Motors
The Minnow from Boaters Catalog installs in minutes with just a screwdriver. It will provide directional assistance whenever it is in the water. The steering response is improved when using thrust or when using another motor for propulsion. If fishing conditions require drifting and working the current while stalking the ‘Elusive Lunker’ the minnow will add stability and limit wind effect. Fight the fish, not your boat. Tested and proven effective by Northwest fishermen.
BENEFITS
- 10X the Steering Control
- 3X the Turn Rate
- 10X the Effective Rudder Area
- Exceptional Tracking in Windy and Turbulent Conditions
- Reduced Cycling of the Autopilot because the steering is more effective.
- Maximizes the thrust of your electric trolling motor.
FEATURES
- Marine Aluminum
- Welded construction
- Fits virtually all modern electric trolling motors
- Simple 5 minute installation with only a screw driver.
- Patent Pending
- Made in the USA
Related Products
Quick View
Troll Plate Fin
Our Troll Plate Fin from Boaters Catalog will give you the control and stability
that you've been missing. Uncle Norm’s Troll Plate Fins triples the effective rudder area giving you powerful directional control at very slow speeds and adds crisp responsiveness at any speed. Fins on trolling plates are a great help tracking on course when trolling during windy conditions or in current. Included are 2 fins that bolt onto your troll plate. Troll plate is not included.
$78.00
Add to cart
Quick View
High Speed Hydraulic Power Lift
This dependable, self contained, and water proof High Speed Hydraulic Power Lift from Boaters Catalog has a maximum lifting capacity of 7,853 pounds of thrust. With the CMC High Speed Hydraulic Power-Lift you will have no problem lifting even a V-6 300 hp max. motor at full throttle. The hydraulic actuator is mounted inside the structure of the Power-Lift, yet it is fully accessible without removing the engine. There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks.
The hydraulic actuator is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic tank and hoses inside the boat). It contains a permanent magnet motor for more power and constant torque. The cylinder within the actuator has twice the lifting capacity than other transom jacks on the market. It contains a no-leak seal and wiper that keeps dirt and water out of the working parts. The system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
$1,179.00 – $1,601.00
Select options
Quick View
Static Jack Plates
CMC Static Jack Plates
The 2-1/2 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom. It can be used as a stand-alone 2 ½” setback plate or used in conjunction with another manual or hydraulic jack plate to give an additional 2 ½” of setback. Constructed of Extruded 6061-T6 Aluminum alloy. (#65213)
The 7 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom bracket and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 3 ½”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#70012)
The 9 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 5 ¾”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#90012)
All our CMC Static Setback Jack Plates are built of the finest quality materials and made to accept any bolt pattern for ease of installation.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
$148.00 – $439.00
Select options
Quick View
Tie Down and Ski Tow
Flush Mounted Tie Down and Ski Tow
Tie Down Features
- May be used anywhere equipment must be secured to the deck-e.g. poling platform, scuba gear, fenders, etc.
- Large size (#195) is also ideal for docks; small size (#196) is ideal for personal watercraft.
- Made of cast stainless steel.
- Assembly consists of main body and sealing cup.
Ski Tow Features:
- Keeps the transform clear of protruding ski tows.
- Four piece patented assembly consists of main body, sealing cup, backing plate and gasket.
$20.65 – $55.87
Select options
Quick View
Orca Performance Fin
The Orca Performance Fin from Boaters Catalog triples the effective rudder area providing a tighter turn radius and sharp crisp directional control at any speed. The larger surface area of the Orca Performance Fin blocks cavitation better than hydrofoils while adding the benefit of enhanced slow speed maneuvering and heading control. The Orca-Performance Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to the cavitation plate using included hardware.
The Orca fin is usually mounted with the fins down but may be installed fins up without modification if you desire less aggressive control. Used and tested on fishing boats, runabouts, pontoon boats, cruisers, ski boats and bass boats (over 80 HP) since 2002.
The New Orca Heavy Duty Fin for outboards over 250 HP is now available, click here.
$245.00
Add to cart
Quick View
Boat Tool Holder
Customize Your Vessel, Fishing Tools, Improve the hardware on your boat, Improve your beach or dock fishing experience, Improve your fishing tackle, Other Boat Hardware, Snap-N-Trac Organizer System
All-in-one, customizable Boat Tool Holder from Boaters Catalog for lures, pliers, knives, hook extractor, and cup holder.
Customize the Snap-N-Trac the way you want! 3 different designs with the one kit.
Lay the pieces out any way you like. Simply attach the trac then snap in the pieces in the design you prefer.
Can be installed where other systems cannot!
Add more kits to hold more stuf!
$18.95
Add to cart
Quick View
Jet Ski Ladder
Customize Your Vessel, Boarding Steps and Ladders, Dock Ladders, Gift giving, Improve the hardware on your boat, Other Boat Hardware
Jet Ski Ladder from EZ Riser™ is a flexible 2 boarding step ladder that fits NEWER personal watercraft. Made from the finest American made materials, EZ Riser is a flexible boarding step that fits most personal watercraft. Simply loop the rope through the back “D” clamp, then back through itself securing it to the “D” clamp.
- Installs in seconds,
- No tools required,
- Extremely convenient,
- Stores easily on back “D” clamp.
- Adjustable and transferable,
- No mooring interference,
- UV-treated for long life,
- Can also be used on jet boats,
- 300 pound capacity.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels from the water, you can use it.
$39.99
Add to cart
Quick View
Hydraulic Jack Plate for 400HP
The CMC HD Hydraulic Jack Plate PL-65HD Power-Lift from Boaters Catalog is designed for 400 HP outboard motors. The PL-65HD is made of 6061 T6 aluminum alloy extrusions and fastened with stainless steel fasteners for maximum strength and durability. The structure incorporates a patented roller design providing less friction, longer wear, less maintenance and virtually eliminates any chance of binding.
The self-contained and water proof electric hydraulic power unit and cylinder is embodied into one actuator inside the structure of the Power-Lift and includes its own fluid reservoir. Providing a lifting capacity of 7853 lbs of thrust, it has no problem lifting a 400 HP motor at full speed.
The CMC HD Hydraulic Jack Plate is made of 100% non-ferrous material which makes it more impervious to salt and fresh water. This design eliminates the need to install a hydraulic tank, motor, pump and hoses inside the boat saving the boat room where needed. It comes full of fluid, tested and ready for operation.
(See below for a description of transom wedges and washer plates.)
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
See all our quality CMC products for your outboard motor here.
$1,460.00 – $1,684.00
Select options
Quick View
Dolphin Trolling Fin
The Dolphin Trolling Fin from Boaters Catalog gives you an edge on the water by providing exceptional tracking in wind and turbulent conditions. The Fin triples the effective rudder area which improves your stability, increases your ability to turn and reduces the cycle time on your auto-pilot system. The Dolphin-Trolling Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to cavitation plate using included hardware. Tested and approved by Alaska and Northwest fishing guides.
Recommended for motors less than 79 Horsepower with up to a 12" Diameter Prop
$168.00
Add to cart
Quick View
Flexible Boarding Ladder
Boarding Steps and Ladders, Customize Your Vessel, Dock Ladders, Gift giving, Improve the hardware on your boat, Other Boat Hardware
The Flexible Boarding Ladder from Boaters Catalog is the ideal solution for getting on your boat after a swim or helping someone else easily get on to your boat.
The issue: you have either fallen in the water or you decide to take a dip, how do you re-board your BOAT? As an example we'll take a Bass Boat. without a Bass Boat Ladder you will find it very difficult to enter your Bass Boat.
The answer: You re-board with the cost effective Bass Boat Ladder known as the Flexible Boarding Ladder by EZ Riser™.
The EZ Riser FBL is designed for many boats but especially as a BASS BOAT LADDER. As an owner of a Bass Boat, if you don't have a fixed ladder, then the EZ Riser BASS BOAT LADDER is your answer.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels you can use it.
$39.99 – $64.99
Select options
