Oval Lifting Eye
Our Oval Lifting Eye from Boaters Catalog is a small compact unit. The hub pivots two ways to overcome a slight misalignment at installation. The unit can be drained or sealed water tight. It is flush with the deck and constructed of type 316 ss. Our unit requires less clearance under the deck than our lifting cleats.
- All stainless steel parts; eye and base are 316, lifting hardware is 304.
- The sling is a solid casting for increased strength.
- Parts may be purchased separately.
- Requires less clearance under deck than our lifting cleats..
- Fastens to deck with four #10 screws.
Round Lifting Eye
Our Round Lifting Eye from Boaters Catalog is constructed with all stainless steel parts; eye and base are 316, lifting hardware is 304.
- The sling is a solid casting for increased strength.
- Parts may be purchased separately.
- 2 3/8" diameter hole required.
- Fastens to deck with four #10 screws.
- The maximum working load of the eye is 4,000 pounds in the direction of the axis of the threaded rod shank only.
See more of our quality boat accessories here.
Large Round Lifting Eye
Our Large Round Lifting Eye from Boaters Catalog is constructed with all stainless steel parts; eye and base are 316, lifting hardware is 304. When not in use it is flush to the deck or gunwale to avoid a trip hazard.
- The sling is a solid casting for increased strength.
- Parts may be purchased separately.
- 3 1/4" diameter hole required.
- Fastens to deck with four 1/4" screws.
Pull Up Lifting Cleat
Our Pull Up Lifting Cleat from Boaters Catalog is flush to the deck or gunwale when not in use to avoid a trip hazard. They are made from stainless steel and will not discolor your boat.
- The Cleat is 6"
- All stainless steel parts; cleat and base are 316, lifting hardware is 304.
- The sling is a solid casting for increased strength.
- Parts may be purchased separately. A cut-out template is supplied.
- Fastens to deck with four #10 screws.
- Each cleat is supplied with a backing plate which also serves as the cut out template. Screws are not included.
- Rod length is 12-inches. Please call for custom lengths.
Wide-Line Cleats
Our Wide-Line Cleats from Boaters Catalog have a sleek, low profile appearance to help avoid trip hazards on your boat from hardware that sticks up when not in use. A large flange helps cover a rough cut-out area.
- Made of 316 cast stainless steel.
- They mount from the bottom via welded stainless steel threaded studs.
Installation: Backing hardware serves as the cut out template and is standard on all models and included with each cleat.
- Each cleat is shipped with a 1/8" thick backing plate which also serves as the cut-out template.
- Drill four holes and saw-cut clearance between the two center holes.
- Insert cleat from the top, and backing plate from the bottom. Secure with lock nuts.
Folding Cleats
Our Stainless steel Folding Cleats from Boaters Catalog mount above the deck with studs or nuts and bolts so there are no large holes to drill in your gunwale as with the Pop-Up and Pull-Up style cleats. Simply drill four small holes for the studs and bolt them down from the bottom.
- Mounts on surface of boat. No cut-outs or hole saws required.
- These cleats lock down when not needed, and spring up when release button is pushed in.
- No drain tubes or drain receptacles required. They do not leak into the boat.
- The most simple installation of any retractable cleat in the industry.
- Constructed of marine grade 316 cast S.S. and brightly polished.
- Two styles to choose from: The stud mount (with hidden fasteners) or through bolted (with visible screw holes). Stud length is 1 1/2".
- Great for use on pick-up truck beds as well.