Folding Cleats
Our Stainless steel Folding Cleats from Boaters Catalog mount above the deck with studs or nuts and bolts so there are no large holes to drill in your gunwale as with the Pop-Up and Pull-Up style cleats. Simply drill four small holes for the studs and bolt them down from the bottom.
- Mounts on surface of boat. No cut-outs or hole saws required.
- These cleats lock down when not needed, and spring up when release button is pushed in.
- No drain tubes or drain receptacles required. They do not leak into the boat.
- The most simple installation of any retractable cleat in the industry.
- Constructed of marine grade 316 cast S.S. and brightly polished.
- Two styles to choose from: The stud mount (with hidden fasteners) or through bolted (with visible screw holes). Stud length is 1 1/2".
- Great for use on pick-up truck beds as well.
Pop Up Cleat 202
Our Pop Up Cleat 202 from Boaters Catalog pops up at the push of a button - simply push it back down when it’s no longer needed and it locks in the flush position to avoid trip hazards on your gunwales.
In the "up" position, POP-UP® Cleats function exactly like a conventional cleat.
- Available in four sizes: 4 1/2 inch, 6 inch, 8 inch, and 10 inch.
- The 6", 8", and 10" 202 Series Cleats are Available with 'No Visible Screw Holes' to be mounted from below with studs.
- Made of marine grade 316 stainless steel.
- Each POP-UP® Cleat is shipped with an aluminum backing plate which also serves as the cut-out template.
- Screws and nuts not included
- Use the supplied backing plate as a template to scribe the outline of the cut-out.
- After cutting out the shape, insert Pop-Up® Cleat into opening and transfer mounting holes from cleat into deck.
- Attach the backing plate and waterproofing cup (if needed) below the deck.
See more of our quality boat accessories here.
Pull Up Cleat 209
Our Pull Up Cleat 209 from Boaters Catalog have a flat design that keeps you gunwales and bow clean looking. They are ideal for avoiding trip hazards on your boat when they are not in use.
- Sealed base eliminates the need for a waterproofing cup, water can be drained through a fitting at the bottom of the unit.
- Can be converted to a lifting cleat by inserting a connecting rod in the base of the unit and attaching the rod to the bow eye.
- Made of marine grade 316 stainless steel.
- Available in four sizes: 4 1/2", 6", 8" & 10".
- 10" version is available in both through bolt (visible screw holes) and stud-mount (no visible screw holes).
- Each cleat is shipped with a backing plate which also serves as the cut-out template..
- Screws are not included
209-4 requires quantity (4) 3/16" screws
209-6 requires quantity (4) 1/4" screws
209-8 requires quantity (4) 1/4" screws
209-10 requires quantity (4) 5/16" screws