Product Information
Product code: IDP-light Categories: Dockside Lighting, Water, and Power, Maintain or improve your dock, Maintain or improve your lighting system$307.90 – $689.25
Our Dockside Lighting from Boaters Catalog is perfect for lighting paths to the dock, keeping your guests safe while on the dock, security lighting, and simply making your dock look good at night.
- Free standing or post mounted
- Distributes light through plastic windows (360 degree light)
- All aluminum casing
- Powder coated finish
- Economical fluorescent tube
- Designed and manufactured for use in a corrosive salt water environment
- Listed by qualified testing agency
The shopping cart will not add freight to your order. We will call you with your shipping costs after your order has been received.
- The LBC-BELL is 6x6x12 and mounts on top of a piling or post
- The LBB-36 is 6x6x36 inches high and is free standing
- The LBB-41 is 8x8x41 inches high and is free standing
Description
Dockside Lighting
For more dock lighting ideas see our dockside electrical pillars
or see our other options above for complete free standing light pillars
Related Products
Four Step Boarding Stairs
This four step boarding stairs from Boaters Catalog are great for home or marina use as well as boat yards and boat dealers. The unit is coated with ultra-violet resistant white gel coat and it has non skid stairs.
42" H x 31" W x 51" D Weight 63 pounds
Unit shown with the aluminum handrail.
This item can not be shipped outside the Continental United States.
Shipping will be quoted after you order or you may call 800-745-0765 for a quote.
*NOTE: All products hand-made to order. Allow 8-10 weeks lead time.
Dockside Electrical Pillars
Standard Dockside Electrical Pillars from Boaters Catalog
Standard Features
- Dimensions: 8" x 8" x 41"(Height)
- Casing: Maximum six receptacles (9 poles)
- Extruded aluminum 6063 with 3/16" wall thickness
- Welded base for extra strength
- All stainless steel fasteners with nylon washers
- Isolation plate to separate water, telephone and TV from "electrical" (completely waterproof)
- Each receptacle protected by a thermal magnetic circuit breaker
- Marine grade electrical receptacles are available in 20 amp duplex GFI and 20, 30 & 50 amp twist-lock , 100 amp single & three phase - pin and sleeve
- Electrical distribution block - direct feed
- Plastic three sided lenses
- Cone top
- Powder coated white
- 15 year unconditional warranty on structural integrity of casing
- Listed by qualified testing agency
Options
- Power block - loop feed (stud) - maximum wire size 500 MCM cable
- TV/telephone receptacle
- PL-9 fluorescent light & photo cell
- Thermo plastic receptacle covers
- Aluminum covers with receptacle mounted on a 45° down angle and back lighted.
- Electric meters
- Water meters with locking ball valves available on 45" unit
- 45" height
- Hose holders / cable brackets
- European power receptacles
- Custom pillar available
Call us for a quote on the stand options you need at: 1-800-745-0765
All our dockside electrical pillars are built to order and can take from 2-4 weeks for manufacture from date of order.
Finger Pier Lift Ladder
Captain Charlie's Wide Tread Finger Pier Lift Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto the dock.
4" wide step
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread finger pier lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Finger Pier Straight Ladder
Captain Charlie's Finger Pier Straight Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Flexmaster Dock Fender
Our superior Flexmaster Dock Fender from Boaters Catalog is available in black or white.
- Extruded from a special poly vinyl chloride compound
- Black will not mark boat
- Designed to mount to any 2" x 4" or 4" x 4”
Purchase the Flexmaster Fenders by the total number of feet you need. If you need it cut into specific lengths, tell us in the notes at check out what lengths you need.
Click here to order end caps for your Flexmaster Fenders.
All Flexmaster freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight for this product to your order. You may call 800-745-0765 for a quote.
Dock Cleats
Our high quality Dock Cleats from Boaters Catalog are the best "S" cleats you can buy.
- High quality cast aluminum for corrosion resistance
- Magnesium for Strength
- Large "footprint" for maximum holding strength.
- Recessed bolt area
- Fully guaranteed against breakage.
- Corrosion resistant - no ugly stains.
- Three sizes available (10", 12", and 15") for different size vessels.
- Powder Coating is an available option
Four Leg Fish Cleaning Table
Our Four Leg Fish cleaning Tables from Boaters Catalog are constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in.
The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel.
(Some of our images show optional add-ons such as hose holders, water bibbs, or pliers and knife holders. Call 1-800-745-0765 for options pricing.)
There is a 4-5 week lead time for all tables.
See more of our quality dock products here.
Stair Tread Dock Ladder
Our Stair Tread Dock Ladder from Boaters Catalog comes in a 4 step only at this time
- Marine grade aluminum construction
- Heavy duty uprights(.060)
- 304 stainless steel fasteners
- Proprietary quick disconnect hardware included(not shown)
- Non-skid steps & square tube
- UPS shippableNote: Proprietary quick disconnect hardware with this ladder consists of a pair of tie-down eye straps that bolt to the dock and the ladder has connectors that go under the eye straps to hold it in place.(This is NOT the Captain Charlie's quick disconnect that is shown with the Captain Charlie's pipe style ladders)
There may be a lead time on these ladders. Shipping will be quoted by e-mail or telephone after order is placed or you may call 800-745-0765
See more of our quality ladders here.
Round Flat Piling Caps
This superior line of Round Flat Piling Caps from Boaters Catalog is offered in sizes from 5-1/2" to 18" (in 1/2" increments), in both black
and white.
An injection-molded process using LLDPE Metallocene Based Polymer makes these caps superior in strength, flexibility, and dimensional consistency. The material contains mildew inhibitors and is UV stabilized.
These piling caps will stand up to the harsh marine environment and keep birds from roosting, which will extend the life of pilings many years.
All piling cap freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight to your order or you may call 800-745-0765 for a quote.