Important Information...
Online Policies
International Sales
Shipping and Returns
Your Privacy Matters
Talk to Us!
Quick View
4 Leg Cleaning table
Captain Charlie's 4 leg cleaning table with drawer comes standard with a white powder coated aluminum frame, knife, hose holder, plier and drink holder, single slide out drawer (shown with double drawer which is optional), water spigot, white 
powder coated aluminum hose holder. 50"W x 23"x D x 1/2" thick marine grade white Starboard cutting surface 50"W x 23"D x 36"H
Freight will be quoted after order is placed. You may call 800-745-0765 for any information.
There is a 4-5 week lead time for tables.
See more of our quality dock upgrades here.
Quick View
Affordable Aluminum Fender Brackets
Affordable Aluminum Fender Brackets from Boaters Catalog.
When pilings are not available for mounting fenders, aluminum fender brackets serve as a cost-effective solution. These brackets offer a more visually appealing alternative to installing pilings while providing the necessary protection for your vessel. The standard channel width of 4 inches accommodates 4x4 lumber, and standard sizes include one foot and three feet. Additionally, custom lengths are available. For larger vessels, it is recommended that the fenders do not extend above or below the braces more than 12 inches, unless supported by a bulkhead or lower piling. For mid-sized to smaller vessels, the standard mount should not extend more than 4 feet above or below the mounting point, and additional support may be required.
Call us for a price quote on the braces you need at 1-800-745-0765
See all our quality dock products here.
Quick View
Bench Seat
Our Bench Seat from Boaters Catalog is a super comfortable fiberglass bench seat that can be used for a boat, pool area, patio, or on a dock. It seats 2 adults or 3 children comfortably. It has an Ultra-violet resistant white gelcoat. The seat from top to bottom is 16".
- 43"L x 30"D x 26"H
There is an 11 week lead time on our fiberglass products at this time.
Quick View
Corner Mount Fender
Quality Flexmaster Corner Mount or Concrete Piling Fender for your dock from Boaters Catalog
- Used to protect corners on concrete piling or any 90 degree angle
- Minimum 12 inches, Maximim 12 feet long The price of the mounted Corner Mount Bumpers is per foot(mounted on 2x4 recycled plastic) .
Enter the number of feet you want in the quantity box below.
Shipping will be quoted by e-mail or telephone after order is placed or you may call 800-745-0765 for a quote
See all our quality dock products here.
$36.55
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Deluxe Step Box with Storage
Maintain or improve your dock, Boarding Steps and Ladders, Customize Your Vessel, Improve the hardware on your boat
Our Deluxe Step Box with Storage has sleek rounded edges, built-in non skid surface on top of the steps, and Euro-style chrome brass handles.
W 22" x H 12.75" x D 17.5"
Captain Charlie’s™ Heavy Water Products are not your everyday cookie cutter products that you see in many marine stores. They are high end, high quality, yet affordable products that have been missing from the market. We take great pride in the quality of all our products and Captain Charlie’s™ Heavy Water leads the pack in quality construction.
Shipping on our steps will be quoted at time of sale. You may call 800-745-0765 for a freight quote.
Quick View
Deluxe Step Box with Storage 2
Maintain or improve your dock, Boarding Steps and Ladders, Customize Your Vessel, Gift giving, Improve the hardware on your boat
Our Deluxe Step Box with Storage 2 has sleek rounded edges, built in non skid surface on top of the steps and Euro-style chrome brass handles.
W 22" x H 14" x D 17.5"
Captain Charlie’s™ Heavy Water Products are not your everyday cookie cutter products that you see in many marine stores. They are high end, high quality, yet affordable products that have been missing from the market. We take great pride in the quality of all our products and Captain Charlie’s™ Heavy Water leads the pack in quality construction.
Shipping on our steps will be quoted at time of sale. You may call 800-745-0765 for a freight quote.
There is an 11 week lead time on our fiberglass products
Quick View
Dock Cleats
Our high quality Dock Cleats from Boaters Catalog are the best "S" cleats you can buy.
- High quality cast aluminum for corrosion resistance
- Magnesium for Strength
- Large "footprint" for maximum holding strength.
- Recessed bolt area
- Fully guaranteed against breakage.
- Corrosion resistant - no ugly stains.
- Three sizes available (10", 12", and 15") for different size vessels.
- Powder Coating is an available option
$20.95 – $69.30
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Dock Ladder Quick Disconnect
Captain Charlie's Dock Ladder Quick Disconnect from Boaters Catalog is an easy and unique way for removing a ladder from a dock. The Quick Release Kit allows the ladder to be taken off the dock effortlessly and without tools for storage when not in use.
Quick View
Dock Lift Ladder
The Dock Lift Ladder from Boaters Catalog is an innovative, retractable ladder featuring a new and improved heavy-duty rung hangar. To extend the life of the ladder, simply pull up the lower section above the water line to eliminate marine growth.
The plastic coated lift cable will provide long lasting service.
Available in 3, 4, 5, 6, and 7 step.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
$267.92 – $378.42
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Dock Line Supports
Dock Line Supports from Boaters Catalog attach to pilings using nails or spikes. Prevents dock lines from falling to bottom of pilings or in the water and creates convenient holder for lines when boat leaves the dock. Makes docking easier when using a boat hook to grab your lines.
Our hangers are made from #1 grade pressure-treated Southern Yellow Pine or High Density Polyethylene recycled plastic. (color white shown is not available at this time)
Installs easily onto piling with nails or lag screws.
Length - 12".
Routed edges provide a smooth finish to prevent chafing of the lines.
$0.00
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Dock Safety Bar
Our safety bar from Boaters Catalog gives you that needed support boarding or exiting your watercraft.
The dock safety bar on a dock or seawall provides that extra stability.
Made of all aluminum anodized tube and is UPS shippable.
Measures 12" Wide x 33" High.
See more of our quality dock products here.
Quick View
Dock Swing Ladder
The Dock Swing Ladder from Boaters Catalog has the same great features as the Straight Ladder but can be stored and secured up and out of the water (90º) with a quick release pin.
The ladder has a fixed s/s bolt through the ladder which pivots in a self-lubricating brass bushing installed in the bracket for maximum wear.
Perfect for keeping side rails and steps clean.
Available in 3, 4, 5, 6, and 7 step.
Capacity is 500+ lbs..
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
$311.18 – $411.75
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Dockside Electrical Pillars
Standard Dockside Electrical Pillars from Boaters Catalog
Fantastic news! All of our Marine Dock Power Pedestals have been listed by ETL conforming to UL 231 Standards! This prestigious listing is a testament to our manufacturers unwavering commitment to quality, safety, and innovation in marine electrical solutions. With the ETL mark, our customers can trust that our Marine Dock Power Pedestals meet the highest standards of safety and reliability, ensuring confidence in every installation.
Standard Features
- Dimensions: 8" x 8" x 41"(Height)
- Casing: Maximum six receptacles (9 poles)
- Extruded aluminum 6063 with 3/16" wall thickness
- Welded base for extra strength
- All stainless steel fasteners with nylon washers
- Isolation plate to separate water, telephone and TV from "electrical" (completely waterproof)
- Each receptacle protected by a thermal magnetic circuit breaker
- Marine grade electrical receptacles are available in 20 amp duplex GFI and 20, 30 & 50 amp twist-lock , 100 amp single & three phase - pin and sleeve
- Electrical distribution block - direct feed
- Plastic three sided lenses
- Cone top
- Powder coated white
- 15 year unconditional warranty on structural integrity of casing
- Listed by qualified testing agency
Options
- Power block - loop feed (stud) - maximum wire size 500 MCM cable
- TV/telephone receptacle
- PL-9 fluorescent light & photo cell
- Thermo plastic receptacle covers
- Aluminum covers with receptacle mounted on a 45° down angle and back lighted.
- Electric meters
- Water meters with locking ball valves available on 45" unit
- 45" height
- Hose holders / cable brackets
- European power receptacles
- Custom pillar available
Call us for a quote on the stand options you need at: 1-800-745-0765
All our dockside electrical pillars are built to order and can take from 2-4 weeks for manufacture from date of order.
Quick View
Dockside Lighting
Dockside Lighting, Water, and Power, Maintain or improve your dock, Maintain or improve your lighting system
Our Dockside Lighting from Boaters Catalog is perfect for lighting paths to the dock, keeping your guests safe while on the dock, security lighting, and simply making your dock look good at night.
- Free standing or post mounted
- Distributes light through plastic windows (360 degree light)
- All aluminum casing
- Powder coated finish
- Economical fluorescent tube
- Designed and manufactured for use in a corrosive salt water environment
- Listed by qualified testing agency
The shopping cart will not add freight to your order. We will call you with your shipping costs after your order has been received.
- The LBC-BELL is 6x6x12 and mounts on top of a piling or post
- The LBB-36 is 6x6x36 inches high and is free standing
- The LBB-41 is 8x8x41 inches high and is free standing
$307.90 – $689.25
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Economy Boarding Step
Improve the hardware on your boat, Boarding Steps and Ladders, Customize Your Vessel, Maintain or improve your dock
Our Economy Boarding Step from Boaters Catalog is a single fiberglass cockpit step with non-skid surface, 12 inches high with handles on both sides.
Measures W 22" x H 12" x D 17"
Wt 14lb
There is a lead time of 11 weeks on all fiberglass items
You may call for more information 800-745-0765 for the Economy Boarding Step
Quick View
Fiberglass Fish Cleaning Station
Captain Charlie's Fiberglass Fish Cleaning Station from Boaters Catalog is constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and powder coated for a clean finish. All fasteners are 316 grade stainless steel.
(Some of our images show optional add-ons such as hose holders, water bibbs, oval sink and drain, 110 GFI Duplex power outlet. Call 1-800-745-0765 for options pricing.)
This unit comes standard with knife, plier and drink holder
There is an 11-15 week lead time for all fiberglass at this time.
Quick View
Finger Pier Ladder
Captain Charlie's Wide Tread Finger Pier Straight Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
4" wide step
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread finger pier straight ladder at this time, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
$284.31 – $389.47
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Finger Pier Lift Ladder
Captain Charlie's Wide Tread Finger Pier Lift Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto the dock.
4" wide step
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread finger pier lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
$262.04 – $354.65
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Finger Pier Lift Ladder
Captain Charlie's Finger Pier Lift Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
$236.56 – $310.38
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Finger Pier Straight Ladder
Captain Charlie's Finger Pier Straight Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
$242.28 – $325.91
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Fish Cleaning Station Options
Our fish cleaning station options from Boaters Catalog are high quality to match our fish cleaning tables.
- Stainless Steel Oval Sink and Drain
- Aluminum Hose Holder
- SS Water Bibb
- 110 GFI Duplex Power Outlet
- Umbrella Holders
- T-Top - Your Choice of Sunbrella Material
Call 1-800-745-0765 for pricing.
Quick View
Flexmaster Dock Fender
Our superior Flexmaster Dock Fender from Boaters Catalog is available in black or white.
- Extruded from a special poly vinyl chloride compound
- Black will not mark boat
- Designed to mount to any 2" x 4" or 4" x 4”
- Minimum purchase length is 6 feet but we can cut it to whatever length you need.
Purchase the Flexmaster Fenders by the total number of feet you need. If you need it cut into specific lengths, tell us in the notes at check out what lengths you need.
Click here to order end caps for your Flexmaster Fenders.
All Flexmaster freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight for this product to your order. You may call 800-745-0765 for a quote.
$15.50 – $30.13
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Flip Up Ladders
Our quality Flip Up Ladders from Boaters Catalog come completely out of the water so no algae or or other growth can occur when not in use.
- Marine grade aluminum construction
- Heavy duty uprights(.060)
- 304 stainless steel fasteners
- Proprietary quick disconnect hardware included(not shown)
- Non-skid steps & square tube
- Flip it up and out of the way
- Stair tread style Flip-It Ladder
Note: Proprietary quick disconnect hardware with this ladder consists of a pair of tie-down eye straps that bolt to the dock and the ladder has connectors that go under the eye straps to hold it in place.(This is NOT the Captain Charlie's quick disconnect that is shown with the Captain Charlie's pipe style ladders)
There may be a lead time on these ladders from the manufacturer.
Shipping will be quoted by e-mail or telephone after order is placed or you may call 800-745-0765.
$315.00 – $352.80
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Floating Dock Lift Ladder
Captain Charlie's Wide Tread Floating Dock Lift Ladder from Boaters Catalog has a fixed portion that extends only 14-1/2inches down from the top of the dock. This means that a 7 step ladder hangs down only 6 feet, a 6 step ladder hangs down only 5 feet etc. All our other ladders extend down the same number of feet as steps.
The Floating Dock Ladder has "Hoop Handles" and can be used with our "Quick Disconnect" option.
4" wide step
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread floating dock lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
$338.70 – $408.16
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Floating Dock Lift Ladder
Captain Charlie's Floating Dock Lift Ladder from Boaters Catalog has a fixed portion that extends only 14-1/2inches down from the top of the dock. This means that a 7 step ladder hangs down only 6 feet, a 6 step ladder hangs down only 5 feet etc. All our other ladders extend down the same number of feet as steps.
The Floating Dock Ladder has "Hoop Handles" and can be used with our "Quick Disconnect" option.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
$332.57 – $419.78
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Foldit Dock Cart
Improve your beach or dock fishing experience, Dock Carts, Dock Upgrades, Maintain or improve your dock
Our Foldit Dock Cart from Boaters Catalog is The Collapsible Cart that’s Big on Hauling And Small on Storage!
Shipping is included in the price
- HAULS UP TO 330 POUNDS
- COMPLETELY RUST AND CORROSION-RESISTANT
- FOLDS FOR EASY STORAGE
- STURDY, ALUMINUM CONSTRUCTION
Proudly Made in the USA
Boaters know the toughest part of boating is usually hauling gear from the car to the boat and then back again. Down ramps, over docks...it’s hard work!
The Foldit marine cart hauls all those cumbersome boating supplies with ease... coolers, skis, anchors, mooring line...you name it.
You’ll spend less time and effort loading and unloading boats and more time on the water! Like the home and garden model, our marine cart weighs just 33 pounds and easily carries 10 times it own weight. The 20" pneumatic tires mean stable, effortless maneuverability with even heavy loads over ramps, docks and uneven terrain. The difference is in the carts extra rugged marine-grade aluminum construction and stainless steel components. That assure complete rust and corrosion protection-even after years of exposure to salt-water spray.
Outside dimensions:
Length - 55", Width - 30-3/4", Depth - 23"
Inside Dimensions:
Length - 38", Width - 22-3/4", Depth - 11-1/2"
Folded Dimensions: 41" Long x 9.5" Wide x 22" Deep
Shipping is included in the price.
Quick View
Four Leg Cleaning Table
Our economy four leg cleaning table from Boaters Catalog is constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel. (some of our images may show optional add-ons such as hose holders, water bibbs, or pliers and knife holders)
There is no under-shelf on the these models.
Size: 40"W x 23"D x 38"H or 50"W x 23"D x 38"H
*NOTE: All products hand-made to order. Allow 5 weeks lead time.
You may call for a lead time and freight quote - 800-745-0765
$490.00 – $579.95
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Four Leg Fish Cleaning Table
Our Four Leg Fish cleaning Tables from Boaters Catalog are constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in.
The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel.
(Some of our images show optional add-ons such as hose holders, water bibbs, or pliers and knife holders. Call 1-800-745-0765 for options pricing.)
There is a 4-5 week lead time for all tables.
See more of our quality dock products here.
$605.00 – $1,310.00
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Four Step Boarding Stairs
This four step boarding stairs from Boaters Catalog are great for home or marina use as well as boat yards and boat dealers. The unit is coated with ultra-violet resistant white gel coat and it has non skid stairs.
42" H x 31" W x 51" D Weight 63 pounds
Unit shown with the aluminum handrail.
This item can not be shipped outside the Continental United States.
Shipping will be quoted after you order or you may call 800-745-0765 for a quote.
*NOTE: All products hand-made to order. Allow 8-10 weeks lead time.
Quick View
Gunwale Boarding Mat
Gift giving, Boat and Dock Mats, Customize Your Vessel, Look your best, Maintain or improve your dock
Our Custom Embroidered Gunwale Boarding Mat from Boaters Catalog is a plush yet durable cover that protects your gunwale from marks and scratches while creating a safe way to board your boat.
- Made from our UV resistant, marine grade carpet material and backed with a non-skid, non-marking rubber that won't deteriorate over time.
- Our Boarding Mat can be customized with your embroidered boat name or other text, adding that personal touch.
- The Gunwale/Sideboard cover is sand weighted with 6 pound sand bag in each side at both ends (Total of 2 with each mat order) to prevent the mat from sliding during boarding or blowing overboard.
- Longest warranty in the Marine Industry EIGHT YEARS Full Warranty on carpet and backing, Our Gunnel Mat is larger than most- check your sizes before purchasing! Total size is 20" x 36" and the custom embroidery covers the 20" width of the mat.
(our mat image shows the 20" width of the mat as it lays over the gunwale)
If you don't want the name of your boat on the mat we can put "Welcome Aboard" or "Boat Shoes Only" or any short phrase of your choosing.
All our mats and carpets are custom cut and embroidered to order. The lead time is appx. 4-6 weeks from the time of your order until it is shipped due to raw materials being held up in shipping.
$90.00
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Half Moon Boarding Mat
Maintain or improve your dock, Boat and Dock Mats, Customize Your Vessel, Gear for the Captain and Crew, Gift giving, Look your best
Our Custom Embroidered Half Moon Boarding Mat from Boaters Catalog is a plush yet durable cover that protects your deck from marks and scratches while creating a safe way to board your boat. Our mats are seen as door mats around homes as well as on the docks and boats around the country.
- Made from our UV resistant, marine grade carpet material and backed with a non-skid, non-marking rubber that won't deteriorate over time.
- Our Boarding Mat can be customized with your embroidered boat name or other text, adding that personal touch.
- Longest warranty in the Marine Industry EIGHT YEARS Full Warranty on carpet and backing.
Our premium Marine Carpet Boarding Mat an essential accessory for any boating enthusiast . All are made of a plush carpet that is waterproof, stain and fade resistant, mold and mildew resistant, with a non-skid rubber backing. All edges are beautifully finished with matching poly binding. They are available in a wide variety of shapes, colors, and styles. We provide custom embroidery to match.
All our mats and carpets are custom cut and embroidered to order. The lead time is appx. 4-6 weeks from the time of your order until it is shipped due to raw materials being held up in shipping.
If you want more customization just call us at 800-745-0765/
See our other quality boat and dock products here.
$85.00
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Hose Holders
Our quality Hose Holders from Boaters Catalog come in two sizes and are in either natural metal casting for fresh water or powder coated white for much longer life in either fresh or salt water.
- A quality casting of non-corrosive aluminum alloy.
- Powder-coating available.
- Large for 100’ or small for 50’ of hose.
See more of our quality dock products here.
$36.74 – $119.76
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Hose Stands
There quality Hose Stands with Hose Holders and Faucets from Boaters Catalog will withstand the weather in both fresh and salt water usage an will help to keep you dock safe from tripping hazards.
- Extruded marine grade aluminum stanchion 3” X 3” with Almag 35 cast aluminum hose holders
- Powder coated white
- Standard height: 29”
- Standard Base Plate: 5 ½” x 5 ½” with 3/8" mounting holes
- When hose bibb is installed the water line fitting is inside the stand for your water connection
$241.05 – $376.99
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Pedestal Fish Cleaning Table
Our Economy Pedestal Fish Cleaning Table from Boaters Catalog is constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in.
Using your own hardware, this table can be mounted flush to a dock or concrete seawall.
Size: 40"W x 23"D x 38"H
*NOTE: All products hand-made to order. Allow 5 weeks lead time.
See more of our quality dock products here.
Quick View
Pedestal Fish Cleaning Table
Our Captain Charlie's Heavy Water Pedestal Fish Cleaning Table from Boaters Catalog Comes With Water Bibb, Aluminum Hose Holder, and a Knife and Plier Holder.Fish Cleaning Station Base Comes With an Attractive White Powder Coated Finish.
Aluminum Hose Holder, and a Knife and Plier Holder.Fish Cleaning Station Base Comes With an Attractive White Powder Coated Finish.
40" x 23" x 1/2" thick, 36" high White Starboard Fillet Surface.
This Fish Cleaning Table Can Be Shipped Via UPS. It Comes in Two Pieces - Just Place The Starboard Top on the 4" Square Pedestal. The 4 S/S Screws Secure the TOP on Perfectly Every time. An 8" Square Aluminum Base and 4 Mounting Holes(using your mounting hardware) Hold the Table Securely Onto Any Dock.
5 Year Warranty
There is a lead time for manufacture of this item. You may call 800-745-0765 for more information.
Quick View
Pet Dining Mats
Maintain or improve your dock, Boat and Dock Mats, Customize Your Vessel, Gear for the Captain and Crew, Gift giving, Look your best
Our Custom Embroidered Pet Dining Mats from Boaters Catalog are Made of MARINE GRADE plush carpet that is antimicrobial, with a non-skid rubber backing. All edges are beautifully finished with poly binding. We provide custom embroidery to match. We offer your custom pet mat in 4 sizes based on your pets' size. Our mats are easy to clean and our bowls are Stainless Steel and dishwasher safe, 2 stainless steel bowls per Pet Feeding Set.
Sizes are:
- Small- 12x20 mat with 2 ea. 8oz bowls(good for cats)
- Medium- 17x24 mat with 2 ea. 16oz bowls
- Large- 17x27 mat with 2 ea. 32oz bowls
- Xtra-Large- 18x30 mat with 2 ea. 64oz bowls
- Included-Add your personalization just for your pet!
- Made from our UV resistant, marine grade carpet material and backed with a non-skid, non-marking rubber that won't deteriorate over time.
- Our Pet Feeding Mat is customized with your embroidered pet name or other text, adding that personal touch.
- Longest warranty in the Marine Industry EIGHT YEARS Full Warranty on carpet and backing.
Our premium Marine Carpet Mat an essential accessory for any boating enthusiast . All are made of a plush carpet that is waterproof, stain and fade resistant, mold and mildew resistant, with a non-skid rubber backing. All edges are beautifully finished with matching poly binding. They are available in a wide variety of shapes, colors, and styles. We provide custom embroidery to match.
All our mats and carpets are custom cut and embroidered to order. The lead time is appx. 10-14 business days from the time of your order until it is shipped.
See our color charts below as you choose your carpet options.
See our other quality boat and dock products here.
$40.00 – $57.00
Select options
This product has multiple variants. The options may be chosen on the product page
