Product Information
Product code: Z-0-IDP-fndrbrac Categories: Maintain or improve your dock, Dock Fenders, Dock UpgradesAffordable Aluminum Fender Brackets from Boaters Catalog.
When pilings are not available for mounting fenders, aluminum fender brackets serve as a cost-effective solution. These brackets offer a more visually appealing alternative to installing pilings while providing the necessary protection for your vessel. The standard channel width of 4 inches accommodates 4×4 lumber, and standard sizes include one foot and three feet. Additionally, custom lengths are available. For larger vessels, it is recommended that the fenders do not extend above or below the braces more than 12 inches, unless supported by a bulkhead or lower piling. For mid-sized to smaller vessels, the standard mount should not extend more than 4 feet above or below the mounting point, and additional support may be required.
Call us for a price quote on the braces you need at 1-800-745-0765
See all our quality dock products here.
Description
Aluminum Fender Brackets
Please call us for a price quote for your Aluminum Fender Brackets.
They range from $138.75 for a one foot bracket to $243.60 for a seven foot bracket.
Related Products
Dock Swing Ladder
The Dock Swing Ladder from Boaters Catalog has the same great features as the Straight Ladder but can be stored and secured up and out
of the water (90º) with a quick release pin.
The ladder has a fixed s/s bolt through the ladder which pivots in a self-lubricating brass bushing installed in the bracket for maximum wear.
Perfect for keeping side rails and steps clean.
Available in 3, 4, 5, 6, and 7 step.
Capacity is 500+ lbs..
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Wide Tread Lift Ladder
Captain Charlie's Wide Tread Lift Ladder from Boaters Catalog is an innovative, retractable ladder featuring a new and improved heavy-duty rung hangar. To
extend the life of the ladder, simply pull up the lower section above the water line to eliminate marine growth.
4" wide step
The plastic coated lift cable will provide long lasting service.
Available in 3, 4, 5, 6, and 7 step.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Round Cone Piling Caps
This superior line of Round Cone Piling Caps from Boaters Catalog is offered in sizes from 5-1/2" to 18" (in 1/2" increments), in both black
and white.
An injection-molded process using LLDPE Metallocene Based Polymer makes these caps superior in strength, flexibility, and dimensional consistency. The material contains mildew inhibitors and is UV stabilized.
These piling caps will stand up to the harsh marine environment and keep birds from roosting, which will extend the life of pilings many years.
All piling cap freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight to your order or you may call 800-745-0765 for a quote.
Floating Dock Lift Ladder
Captain Charlie's Wide Tread Floating Dock Lift Ladder from Boaters Catalog has a fixed portion that extends only 14-1/2inches down from the top of
the dock. This means that a 7 step ladder hangs down only 6 feet, a 6 step ladder hangs down only 5 feet etc. All our other ladders extend down the same number of feet as steps.
The Floating Dock Ladder has "Hoop Handles" and can be used with our "Quick Disconnect" option.
4" wide step
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread floating dock lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Finger Pier Ladder
Captain Charlie's Wide Tread Finger Pier Straight Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock
.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
4" wide step
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread finger pier straight ladder at this time, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Dock Ladder Quick Disconnect
Captain Charlie's Dock Ladder Quick Disconnect from Boaters Catalog is an easy and unique way for removing a ladder from a dock. The Quick Release Kit allows the ladder
to be taken off the dock effortlessly and without tools for storage when not in use.
Stair Tread Dock Ladder
Our Stair Tread Dock Ladder from Boaters Catalog comes in a 4 step only at this time
- Marine grade aluminum construction
- Heavy duty uprights(.060)
- 304 stainless steel fasteners
- Proprietary quick disconnect hardware included(not shown)
- Non-skid steps & square tube
- UPS shippableNote: Proprietary quick disconnect hardware with this ladder consists of a pair of tie-down eye straps that bolt to the dock and the ladder has connectors that go under the eye straps to hold it in place.(This is NOT the Captain Charlie's quick disconnect that is shown with the Captain Charlie's pipe style ladders)
There may be a lead time on these ladders. Shipping will be quoted by e-mail or telephone after order is placed or you may call 800-745-0765
See more of our quality ladders here.
Dock Cleats

Our high quality Dock Cleats from Boaters Catalog are the best "S" cleats you can buy.
- High quality cast aluminum for corrosion resistance
- Magnesium for Strength
- Large "footprint" for maximum holding strength.
- Recessed bolt area
- Fully guaranteed against breakage.
- Corrosion resistant - no ugly stains.
- Three sizes available (10", 12", and 15") for different size vessels.
- Powder Coating is an available option
Round Flat Piling Caps
This superior line of Round Flat Piling Caps from Boaters Catalog is offered in sizes from 5-1/2" to 18" (in 1/2" increments), in both black
and white.
An injection-molded process using LLDPE Metallocene Based Polymer makes these caps superior in strength, flexibility, and dimensional consistency. The material contains mildew inhibitors and is UV stabilized.
These piling caps will stand up to the harsh marine environment and keep birds from roosting, which will extend the life of pilings many years.
All piling cap freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight to your order or you may call 800-745-0765 for a quote.



