Product Information
Product code: Z-0-IDP-ringnails Categories: Maintain or improve your dock, Dock Accessories, Dock Fenders, Piling Caps$24.33
Our Stainless Steel Ring Shank Large Head Nails from Boaters Catalog are sold by the pound, approximately 110 nails per pound. These 316 stainless steel nails are recommended to install your rub rails and piling caps. They are 1-1/2″ long with a large head and ring shank to eliminate backing out. Use one per 6″ appx. on rub rails and 4 to 6 on piling caps. You should use the nails on both top and bottom nailing strips of either bumper. (one pound of nails should be enough for one 25 foot strip of bumper)
Description
Stainless Steel Ring Shank Large Head Nails
for attaching fenders to boards. See all our Flexmaster dock fender options here.
Related Products
Wide Tread Swing Ladder
Captain Charlie's Wide Tread Swing Ladder from Boaters Catalog has the same great features as the Straight Ladder but can be stored and secured up and out
of the water (90º) with a quick release pin.
The ladder has a fixed s/s bolt through the ladder which pivots in a self-lubricating brass bushing installed in the bracket for maximum wear.
Perfect for keeping side rails and steps clean.
Available in 3, 4, 5, 6, and 7 step.
4" wide steps
Capacity is 500+ lbs..
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread swing ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Dock Cleats

Our high quality Dock Cleats from Boaters Catalog are the best "S" cleats you can buy.
- High quality cast aluminum for corrosion resistance
- Magnesium for Strength
- Large "footprint" for maximum holding strength.
- Recessed bolt area
- Fully guaranteed against breakage.
- Corrosion resistant - no ugly stains.
- Three sizes available (10", 12", and 15") for different size vessels.
- Powder Coating is an available option
Single Leg Mount Fenders
Flexmaster Single Leg Mount Fenders from Boaters Catalog

These fenders are cut to order, up to 12' long,
The single leg mount is meant to be installed horizontally with the nailed leg up.
Picture shows Fender mounted, but they are sold un-mounted by the foot or mounted by the foot. Enter the number of feet you want in the "quantity" box below.
All freight will be quoted by telephone or e-mail after the order is received or call 800-745-0765 for a quote.
Finger Pier Lift Ladder
Captain Charlie's Wide Tread Finger Pier Lift Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto the dock
.
4" wide step
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread finger pier lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
4 Leg Cleaning table
Captain Charlie's 4 leg cleaning table with drawer comes standard with a white powder coated aluminum frame, knife, hose holder, plier and drink holder, single slide out drawer (shown with double drawer which is optional), water spigot, white
powder coated aluminum hose holder. 50"W x 23"x D x 1/2" thick marine grade white Starboard cutting surface 50"W x 23"D x 36"H
Freight will be quoted after order is placed. You may call 800-745-0765 for any information.
There is a 4-5 week lead time for tables.
See more of our quality dock upgrades here.
Finger Pier Straight Ladder
Captain Charlie's Finger Pier Straight Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock
.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Dock Line Supports
Dock Line Supports from Boaters Catalog attach to pilings using nails or spikes. Prevents dock lines from falling to bottom of
pilings or in the water and creates convenient holder for lines when boat leaves the dock. Makes docking easier when using a boat hook to grab your lines.
Our hangers are made from #1 grade pressure-treated Southern Yellow Pine or High Density Polyethylene recycled plastic. (color white shown is not available at this time)
Installs easily onto piling with nails or lag screws.
Length - 12".
Routed edges provide a smooth finish to prevent chafing of the lines.
Wide Tread Lift Ladder
Captain Charlie's Wide Tread Lift Ladder from Boaters Catalog is an innovative, retractable ladder featuring a new and improved heavy-duty rung hangar. To
extend the life of the ladder, simply pull up the lower section above the water line to eliminate marine growth.
4" wide step
The plastic coated lift cable will provide long lasting service.
Available in 3, 4, 5, 6, and 7 step.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Floating Dock Lift Ladder
Captain Charlie's Wide Tread Floating Dock Lift Ladder from Boaters Catalog has a fixed portion that extends only 14-1/2inches down from the top of
the dock. This means that a 7 step ladder hangs down only 6 feet, a 6 step ladder hangs down only 5 feet etc. All our other ladders extend down the same number of feet as steps.
The Floating Dock Ladder has "Hoop Handles" and can be used with our "Quick Disconnect" option.
4" wide step
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread floating dock lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)

