Stainless Steel Ring Shank Large Head Nails
Our Stainless Steel Ring Shank Large Head Nails from Boaters Catalog are sold by the pound, approximately 110 nails per pound. These 316 stainless steel nails are recommended to install your rub rails and piling caps. They are 1-1/2" long with a large head and ring shank to eliminate backing out. Use one per 6" appx. on rub rails and 4 to 6 on piling caps. You should use the nails on both top and bottom nailing strips of either bumper. (one pound of nails should be enough for one 25 foot strip of bumper)
Stair Tread Dock Ladder
Our Stair Tread Dock Ladder from Boaters Catalog comes in a 4 step only at this time
- Marine grade aluminum construction
- Heavy duty uprights(.060)
- 304 stainless steel fasteners
- Proprietary quick disconnect hardware included(not shown)
- Non-skid steps & square tube
- UPS shippableNote: Proprietary quick disconnect hardware with this ladder consists of a pair of tie-down eye straps that bolt to the dock and the ladder has connectors that go under the eye straps to hold it in place.(This is NOT the Captain Charlie's quick disconnect that is shown with the Captain Charlie's pipe style ladders)
There may be a lead time on these ladders. Shipping will be quoted by e-mail or telephone after order is placed or you may call 800-745-0765
See more of our quality ladders here.
Static Jack Plate 5 inch
The CMC Static Jack Plate 5 inch vertical outboard motor extension allows the motor to be mounted 5 inches higher than the standard mounting height on the transom.
It is a must for easy conversion from prop drive to jet drive.
Another application includes mounting the 5 inch vertical extension on a hydraulic jack plate to raise the motor higher on shallow running boats that are equipped with tunnel extensions.
Constructed of Extruded 6061-T6 Aluminum alloy. (#50012) They are 5” wide and 20-1/2” long. It is rated for 300 HP and smaller motors.
Static Jack Plates
CMC Static Jack Plates
The 2-1/2 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom. It can be used as a stand-alone 2 ½” setback plate or used in conjunction with another manual or hydraulic jack plate to give an additional 2 ½” of setback. Constructed of Extruded 6061-T6 Aluminum alloy. (#65213)
The 7 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom bracket and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 3 ½”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#70012)
The 9 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 5 ¾”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#90012)
All our CMC Static Setback Jack Plates are built of the finest quality materials and made to accept any bolt pattern for ease of installation.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Step Box with Storage
Captain Charlie's Heavy Water Deluxe Step Box with Storage is a traditional step box with storage, stainless steel hinge, sleek round edges, Euro-style chrome brass handles, all cut and exposed edges are gel coated. The soft rubber trimmed edge won't scratch up your deck.
Captain Charlie’s™ Heavy Water Products are not your everyday cookie cutter products that you see in many marine stores. They are high end, high quality, yet affordable products that have been missing from the market. We take great pride in the quality of all our products and Captain Charlie’s™ Heavy Water leads the pack in quality construction.
22" x 17" x 12-3/4"
Shipping on our steps will be quoted at time of sale. You may call 800-745-0765 for a freight quote.
*NOTE: All products hand-made to order. Allow 8-10 weeks lead time.
Step Box with Storage 2
Captain Charlie's Heavy Water Deluxe Step Box with Storage 2 from Boaters Catalog has sleek rounded edges, built-in non skid surface on top of the steps, euro-style chrome brass handles, stainless steel hinge, soft rubber trimmed edge and it won't scratch up your deck.
Captain Charlie’s™ Heavy Water Products are not your everyday cookie cutter products that you see in many marine stores. They are high end, high quality, yet affordable products that have been missing from the market. We take great pride in the quality of all our products and Captain Charlie’s™ Heavy Water leads the pack in quality construction.
Shipping on our steps will be quoted at time of sale. You may call 800-745-0765 for a freight quote.
*NOTE: All products hand-made to order. Allow 11 weeks lead time.
Straight Dock Ladder
The Straight Dock Ladder from Boaters Catalog is perfect for seawalls and stationary docks with fluctuating water lines, makes climbing in and out of the water a breeze.
The variety of lengths will accommodate most installations.
Each step is one foot.
Capacity is 500+ lbs.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Three Step Boarding Stairs
These fiberglass three step boarding stairs are great for home or marina use as well as boat yards and boat dealers. The unit is coated with ultra-violet resistant white gel coat, hand rail, and it has non skid stairs.
This item can not be shipped outside the Continental United States.
Shipping will be quoted after you order or you may call 800-745-0765 for a quote.
*NOTE: All products hand-made to order. Allow 8-10 weeks lead time.
Through Hull Fittings
Through hull fittings for drains for your pull up or pop up cleats, lifting rings, or other hardware that you don't want to drain inside the boat.
PRODUCT # | DESCRIPTION |
600 | Brass through hull fitting |
601 | Plastic through hull fitting |
602 | Stainless Steel through hull fitting |
- For up to 1/4" thick hulls.
- Available in plastic, stainless steel or brass.
- Thread is 3/8-24.
Tie Down and Ski Tow
Flush Mounted Tie Down and Ski Tow
Tie Down Features
- May be used anywhere equipment must be secured to the deck-e.g. poling platform, scuba gear, fenders, etc.
- Large size (#195) is also ideal for docks; small size (#196) is ideal for personal watercraft.
- Made of cast stainless steel.
- Assembly consists of main body and sealing cup.
- Keeps the transform clear of protruding ski tows.
- Four piece patented assembly consists of main body, sealing cup, backing plate and gasket.
Trailer and Auto Dolly
The Trailer and Auto Dolly Standard is placed under each tire of the vehicle, making the vehicle a rolling cart that will now roll in any direction with ease. The large roller bearing casters make it simple for anyone to move the vehicle in any direction.
Like all of our casters for The Auto Dolly, the standard caster contains a mar-resistant polyolefin wheel that also features a crown profile. The crown profile wheel means less rolling resistance in contact with the ground. The wheel profile also helps to pinch small debris out of the path, rather than coming to a screeching halt.
The Trailer and Auto Dolly Standard comes in three sizes: 8x16 inches, 12x16 inches, and 16x16 inches wide.
Order in sets of 2 or 4 dollies. Trailer jack wheel dolly is sold separately(see below)
Some assembly required, instructions included.
Special Shipping Information…This item’s freight cannot be calculated by the shopping cart and you will be notified of the freight cost prior to shipping, or you may e-mail us your address and the item you wish to order and we will respond with the freight amount for you or you may call us at 800-745-0765 for a quote
See all our quality trailer accessories here.
Troll Plate Fin
Our Troll Plate Fin from Boaters Catalog will give you the control and stability that you've been missing. Uncle Norm’s Troll Plate Fins triples the effective rudder area giving you powerful directional control at very slow speeds and adds crisp responsiveness at any speed. Fins on trolling plates are a great help tracking on course when trolling during windy conditions or in current. Included are 2 fins that bolt onto your troll plate. Troll plate is not included.
Truck Bumper Mount
Ever needed a place to hold your fishing rods and reels while surf fishing or at the lake? Our Truck Bumper Mount from Boaters Catalog can hold 4 or 6 rods and reels and have a bright anodized finish. Hardware is included. Mount to a 2" receiver hitch by using receiver adapter #ANG563 sold separately.
Shipping will be quoted by telephone or e-mail upon receipt of order.close
Truck Rod and Reel Holders
Our truck Rod and Reel Holders from Boaters Catalog is the ideal place to hold your fishing rods and reels and cooler while surf fishing or at the lake!
Our Surf Mate Jr Truck Rod and Reel Holders Bumper Mount will fill the bill!
- (8) Rod Cooler Rack
- Rack holds a 72 qt cooler
- (2) 45 Degree Rod Tubes
- Adjustable Vertical Height
- Bright Anodized Finish
- High Grade Aluminum Tubing
- Stablizer Bar Included
- Add-On (24") Rod Tubes Available
- Nylon Caps To Secure Reels
- 2" receiver Mountable
- 17" x 30" inside frame dimensions
- UPS Shippable *NOTE*: 2" receiver adapter comes standard with this product
• Add-On rod tubes can be purchased separately to customize this unit
You may call 800-745-0765 for a quote.
Shipping will be quoted by telephone or e-mail upon receipt of order.close
Two Leg Cleaning Table
Our Economy Two Leg Cleaning Table from Boaters Catalog is constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel.
This table has no undershelf.
There is a lead time for this product. You may call 800-745-0765 for more information.
Two Leg Fish Cleaning Table
Our Two Leg Fish cleaning Table are constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel. (40 inch table not shown)
Freight to be quoted after order or call 800-745-0765
There is a 4-5 week lead time on tables.
Two Step Boarding Stairs
Fiberglass Two step boarding stairs from Boaters Catalog with built in non skid steps. There is no handrail available for this unit.
20" H x 25.5" W x 23.5" D
This item can not be shipped outside the Continental United States.
Shipping will be quoted after you order or you may call 800-745-0765 for a quote.
*NOTE: All products hand-made to order. Allow 1 weeks lead time.
Universal Bottle Jack Stabilizer
The Universal Bottle Jack Stabilizer from Boaters Catalog will keep you in a safe position when jacking your car, truck, or trailer on soft soil or sand on the side of the road.
Ever been stuck with a flat trailer tire? Usually your car jack will put you in a very precarious, unsafe situation when you try to use it to jack up the trailer.
Feel safer during lifting and jacking operations. Be prepared for any lifting task the trail or road might throw at you. Feel safer knowing that the jack isn’t going to slip off an axle or topple off a stack of cribbing. The Universal Bottle Jack Stabilizer combines all of the most useful tools to turn our 6 Ton Bottle Jack Recovery Kit into a compact, powerful and safe lifting tool for up to a 48 inch jack.
FEEL SAFER DURING LIFTING AND JACKING OPS
Please measure the foot of your Hi-Lift or Farm jack before ordering this product. You will need to order our Universal Steel Foot (51M-USF) if the width of your Hi-Lift or Farm Jack foot is wider than 4.25"
See more of our boat trailer safety solutions here.
There is a lead time for our jacks and jack components of appx. two weeks.
Universal Steel Foot
This UNIVERSAL STEEL FOOT-HI-LIFT REPLACEMENT FOOT from Boaters Catalog should fit virtually all of the Hi-Lift brand jacks and all of the imported jacks of this type. This UM-51M-USF is easily attached to the jack with a wire bale clevis pin. This foot will replace any foot that is too large( larger than 7 inches X 4 inches) to fit into our base plate regardless of who manufactured the jack.
Shipping will be quoted after the order is placed or you may call 800-745-0765 for a quote.
USCG Licensed Captain Patch
USCG Licensed Captain Patch from Boaters Catalog is a 2 1/2" diameter patch for your shirt, jacket or sweater, embroidered with the Licensed Captain logo. It also has a heat seal backing.
Show pride in your profession with this quality embroidered patch.
USCG Licensed Engineer Hat
Our USCG Licensed Engineer Hat from Boaters Catalog are a solid color, 100% cotton twill. They have a low profile, fabric strap with slide buckle and tuck in grommet and the size is adjustable.
Color Black
Your name can be embroidered on the back of this hat for $14 per item.
To personalize your item with your name or boat name click into the "Personalization" box and type what you want embroidered. We use block capital letters unless otherwise specified. You may enter up to 13 characters per line, including spaces.
Wheel Chocks
Ever been stuck with a flat trailer tire? Use our wheel chocks from Boaters Catalog so you are not put in a very precarious, unsafe situation when you try to use your car jack to jack up the trailer. And then you have to find a rock to put under the other tire. Good Luck!
Feel safer during lifting and jacking operations because you are using high quality wheel chocks. Be prepared for any lifting task the trail or road might throw at you. Feel safer knowing that the trailer isn't going to roll away just as you get it jacked up.
FEEL SAFER DURING LIFTING AND JACKING OPS
shipping will be quoted after your order is placed or you may call 800-745-0765 for a quote
Wide Tread Lift Ladder
Captain Charlie's Wide Tread Lift Ladder from Boaters Catalog is an innovative, retractable ladder featuring a new and improved heavy-duty rung hangar. To extend the life of the ladder, simply pull up the lower section above the water line to eliminate marine growth.
4" wide step
The plastic coated lift cable will provide long lasting service.
Available in 3, 4, 5, 6, and 7 step.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Wide Tread Straight Ladder
Captain Charlie's Wide Tread Straight Ladder from Boaters Catalog is perfect for seawalls and stationary docks with fluctuating water lines, makes climbing in and out of the water a breeze.
4" wide step
The variety of lengths will accommodate most installations.
Each step is one foot.
Capacity is 500+ lbs.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
See all our quality ladders here.
Wide Tread Swing Ladder
Captain Charlie's Wide Tread Swing Ladder from Boaters Catalog has the same great features as the Straight Ladder but can be stored and secured up and out of the water (90º) with a quick release pin.
The ladder has a fixed s/s bolt through the ladder which pivots in a self-lubricating brass bushing installed in the bracket for maximum wear.
Perfect for keeping side rails and steps clean.
Available in 3, 4, 5, 6, and 7 step.
4" wide steps
Capacity is 500+ lbs..
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread swing ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Wide-Line Cleats
Our Wide-Line Cleats from Boaters Catalog have a sleek, low profile appearance to help avoid trip hazards on your boat from hardware that sticks up when not in use. A large flange helps cover a rough cut-out area.
- Made of 316 cast stainless steel.
- They mount from the bottom via welded stainless steel threaded studs.
Installation: Backing hardware serves as the cut out template and is standard on all models and included with each cleat.
- Each cleat is shipped with a 1/8" thick backing plate which also serves as the cut-out template.
- Drill four holes and saw-cut clearance between the two center holes.
- Insert cleat from the top, and backing plate from the bottom. Secure with lock nuts.
Windlass Service Spares and Parts
Windlass Service Spares and Parts
We have access to parts for Lewmar, Horizon, Sprint, Simpson Lawrence, James Neilssen, Maxwell, and Quick. Many of the older uiits have no parts available but we won't know until we check with our US supplier. Some are available from Scotland, but they are more expensive and take a longer time to acquire.
If you need parts or service on your windlass, call us at 800-745-0765, Monday - Friday 9 am - 4 pm EST.
Wooden Dock Cart
- Revolutionary ’’3-way’’ gate locks tightly to transport big loads securely, swings open to release loose loads like sand quickly, or lift off to unload bulky loads like full coolers.
- Hauls all those cumbersome boating supplies with ease--coolers, skis, anchors, mooring lines, you name it--enabling you to spend less time and effort loading and unloading boats and more time on the water.
- Some assembly required.
- Maximum load capacity: 300 lbs.
- Wheels: 2 semi-pneumatic
- Wheel diameter: 20’’
- Dimensions: 50’’L x 30’’W x 23-1/2’’H
- Cargo Capacity: 6.5 Cubic Feet