Product Information
Categories: Maintain or improve your engine, Repair or maintain your hydraulic engine control systemTo properly service your Hydraulic Engine and Transmission Control Maintenance and Service contact Boaters Catalog at 800-745-0765 or fill in your information here to send your units to us.
Teleflex/Morse / Hynautic is the world’s largest manufacturer of marine hydraulic controls
- Proven performance and reliability for over 30 years
- Dependable control for luxury cruisers, workboats and commercial fishing boats
- Nothing moves boats better a hydraulic control is a liquid link between a sender and an actuator
- Provides pure energy in motion without friction, without backlash, no lost motion up to four stations is possible depending on length of tubing run
- Unique and highly accepted feel
- Simple installation
Description
Hydraulic Engine Control Service
To see the purge and synch instructions for Hynautic Control Systems, click below:
Hynautic Engine Controls purge and sync
We have a complete hydraulic shop that has been servicing marine and other hydraulics for over 40 years. None too small or too big.
Related Products
Manual Jack Plates
The CMC Manual Jack Plates from Boaters Catalog has comparable design and construction features as the hydraulic lift without the convenience of automated adjustment.
If you desire engine performance enhancement, but don’t have the budget for our hydraulic unit then the ML-65 may be exactly what you are looking for. Our manual units provide similar benefits to the hydraulic units. However, since you cannot raise or lower the engine as you are moving you will not receive the same performance enhancements associated with a hydraulic unit.
The 4 and 5-1/2 inch set back plates are rated for V-6 and smaller motors. They are NOT designed for V-8 or racing applications.
Manual ML-65HD, item#65512 rated for V8 400HP outboards or smaller.
(See description below for transom washer plates and wedges.)
See all our quality CMC products for your outboard here.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Troll Plate Fin
Our Troll Plate Fin from Boaters Catalog will give you the control and stability that you've been missing. Uncle Norm’s Troll Plate Fins triples the effective rudder area giving you powerful directional control at very slow speeds and adds crisp responsiveness at any speed. Fins on trolling plates are a great help tracking on course when trolling during windy conditions or in current. Included are 2 fins that bolt onto your troll plate. Troll plate is not included.
Static Jack Plate 5 inch
The CMC Static Jack Plate 5 inch vertical outboard motor extension allows the motor to be mounted 5 inches higher than the standard mounting height on the transom.
It is a must for easy conversion from prop drive to jet drive.
Another application includes mounting the 5 inch vertical extension on a hydraulic jack plate to raise the motor higher on shallow running boats that are equipped with tunnel extensions.
Constructed of Extruded 6061-T6 Aluminum alloy. (#50012) They are 5” wide and 20-1/2” long. It is rated for 300 HP and smaller motors.
Static Jack Plates
CMC Static Jack Plates
The 2-1/2 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom. It can be used as a stand-alone 2 ½” setback plate or used in conjunction with another manual or hydraulic jack plate to give an additional 2 ½” of setback. Constructed of Extruded 6061-T6 Aluminum alloy. (#65213)
The 7 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom bracket and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 3 ½”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#70012)
The 9 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 5 ¾”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#90012)
All our CMC Static Setback Jack Plates are built of the finest quality materials and made to accept any bolt pattern for ease of installation.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Hydrofoil Fin
Our Hydrofoil Fin from Boaters Catalog will add directional control and stability that you've been missing. Uncle Norm’s Hydrofoil Fin triples the effective rudder area giving you powerful directional control at very high speeds and adds crisp, responsiveness at any speed. These fins do not add drag at high speeds but are a great help maneuvering at slow speeds and during docking or trailering the boat. Fins on hydrofoils are a great help tracking on course in windy conditions or in current.
Includes 2 fins that bolt onto your hydrofoil fin.
Hydrofoil is not included.
CMC Hydraulic Jack Plate
This dependable, self contained, and water proof CMC Hydraulic Jack Plate from Boaters Catalog has a maximum lifting capacity of 7,853 pounds of thrust. You will have no problem lifting even a V-6 300 hp max. motor at full throttle. The hydraulic actuator is mounted inside the structure of the Power-Lift, yet it is fully accessible without removing the engine. There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks.
The catalog cannot determine freight accurately. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
High Speed Hydraulic Power Lift
This dependable, self contained, and water proof High Speed Hydraulic Power Lift from Boaters Catalog has a maximum lifting capacity of 7,853 pounds of thrust. With the CMC High Speed Hydraulic Power-Lift you will have no problem lifting even a V-6 300 hp max. motor at full throttle. The hydraulic actuator is mounted inside the structure of the Power-Lift, yet it is fully accessible without removing the engine. There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks.
The hydraulic actuator is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic tank and hoses inside the boat). It contains a permanent magnet motor for more power and constant torque. The cylinder within the actuator has twice the lifting capacity than other transom jacks on the market. It contains a no-leak seal and wiper that keeps dirt and water out of the working parts. The system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Orca Performance Fin
The Orca Performance Fin from Boaters Catalog triples the effective rudder area providing a tighter turn radius and sharp crisp directional control at any speed. The larger surface area of the Orca Performance Fin blocks cavitation better than hydrofoils while adding the benefit of enhanced slow speed maneuvering and heading control. The Orca-Performance Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to the cavitation plate using included hardware.
The Orca fin is usually mounted with the fins down but may be installed fins up without modification if you desire less aggressive control. Used and tested on fishing boats, runabouts, pontoon boats, cruisers, ski boats and bass boats (over 80 HP) since 2002.
The New Orca Heavy Duty Fin for outboards over 250 HP is now available, click here.
Hydraulic Steering Service and Repair
Hydraulic Steering Service and Repair
After you describe your problem below, click "Add to Cart" and fill in all your information as if placing an order. This will send us your name and address info and you can ship us your package with the receipt that you get inside the package in a zip lock bag.
Be sure you wrap your unit in several sealed plastic bags so no oil leakage will occur in shipping. Pack your unit TIGHTLY in the shipping box so it WILL NOT SHIFT IN TRANSIT. We hate to see shafts sticking out of the box upon arrival because someone thought a 10 pound block of aluminum and steel would not break through a cheap cardboard box with no packing material.
Hydraulic Steering Service and Repair
Dolphin Trolling Fin
The Dolphin Trolling Fin from Boaters Catalog gives you an edge on the water by providing exceptional tracking in wind and turbulent conditions. The Fin triples the effective rudder area which improves your stability, increases your ability to turn and reduces the cycle time on your auto-pilot system. The Dolphin-Trolling Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to cavitation plate using included hardware. Tested and approved by Alaska and Northwest fishing guides.
Recommended for motors less than 79 Horsepower with up to a 12" Diameter Prop