Important Information...
Online Policies
International Sales
Shipping and Returns
Your Privacy Matters
Talk to Us!
Description
Description
Minnow Fin For Trolling Motors
The Minnow from Boaters Catalog installs in minutes with just a screwdriver. It will provide directional assistance whenever it is in the water. The steering response is improved when using thrust or when using another motor for propulsion. If fishing conditions require drifting and working the current while stalking the ‘Elusive Lunker’ the minnow will add stability and limit wind effect. Fight the fish, not your boat. Tested and proven effective by Northwest fishermen.
BENEFITS
- 10X the Steering Control
- 3X the Turn Rate
- 10X the Effective Rudder Area
- Exceptional Tracking in Windy and Turbulent Conditions
- Reduced Cycling of the Autopilot because the steering is more effective.
- Maximizes the thrust of your electric trolling motor.
FEATURES
- Marine Aluminum
- Welded construction
- Fits virtually all modern electric trolling motors
- Simple 5 minute installation with only a screw driver.
- Patent Pending
- Made in the USA
Related Products
Quick View
Hydrofoil Fin
Our Hydrofoil Fin from Boaters Catalog will add directional control 
and stability that you've been missing. Uncle Norm’s Hydrofoil Fin triples the effective rudder area giving you powerful directional control at very high speeds and adds crisp, responsiveness at any speed. These fins do not add drag at high speeds but are a great help maneuvering at slow speeds and during docking or trailering the boat. Fins on hydrofoils are a great help tracking on course in windy conditions or in current.
Includes 2 fins that bolt onto your hydrofoil fin.
Hydrofoil is not included.
Quick View
Static Jack Plate 5 inch
Customize Your Vessel, Maintain or improve your engine, Outboard Jack Plates, Outboard Tilt and Trim
The CMC Static Jack Plate 5 inch vertical outboard motor extension allows the motor to be mounted 5 inches higher than the standard mounting height on the transom.
It is a must for easy conversion from prop drive to jet drive.
Another application includes mounting the 5 inch vertical extension on a hydraulic jack plate to raise the motor higher on shallow running boats that are equipped with tunnel extensions.
Constructed of Extruded 6061-T6 Aluminum alloy. (#50012) They are 5” wide and 20-1/2” long. It is rated for 300 HP and smaller motors.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Quick View
PT130 Tilt and Trim
The CMC PT-130 Tilt and Trim for up to 130 HP from Boaters Catalog allows you to tuck your motor in to get your boat on plane smoother and faster. When you’re underway, you can change the angle of your motor to obtain the best performance for your load and water conditions. It gives you a more stable ride, increases top end speed, allows more prop clearance, and better fuel economy.
Electric Hydraulic Tilt & Trim
You Get Power Tilt & Trim, Better Boat Handling, More Speed, Lower Fuel Consumption and No More Back Strain!
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
See all our quality CMC products for your outboard here.
Price range: $954.00 through $1,133.00
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Through Hull Fittings
Customize Your Vessel, Improve the hardware on your boat, Lifting Cleats, Eyes, and Chocks, Other Boat Hardware, Pop Up and Pull Up Cleats
Through hull fittings for drains for your pull up or pop up cleats, lifting rings, or other hardware that you don't want to drain inside the boat.
| PRODUCT # | DESCRIPTION |
| 600 | Brass through hull fitting |
| 601 | Plastic through hull fitting |
| 602 | Stainless Steel through hull fitting |
- For up to 1/4" thick hulls.
- Available in plastic, stainless steel or brass.
- Thread is 3/8-24.
Price range: $4.51 through $11.57
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Flexible Boarding Ladder
Boarding Steps and Ladders, Customize Your Vessel, Dock Ladders, Gift giving, Improve the hardware on your boat, Other Boat Hardware
The Flexible Boarding Ladder from Boaters Catalog is the ideal solution for getting on your boat after a swim or helping someone else easily get on to your boat.
The issue: you have either fallen in the water or you decide to take a dip, how do you re-board your BOAT? As an example we'll take a Bass Boat. without a Bass Boat Ladder you will find it very difficult to enter your Bass Boat.
The answer: You re-board with the cost effective Bass Boat Ladder known as the Flexible Boarding Ladder by EZ Riser™.
The EZ Riser FBL is designed for many boats but especially as a BASS BOAT LADDER. As an owner of a Bass Boat, if you don't have a fixed ladder, then the EZ Riser BASS BOAT LADDER is your answer.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels you can use it.
Price range: $39.99 through $64.99
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Jet Ski Ladder
Customize Your Vessel, Boarding Steps and Ladders, Dock Ladders, Gift giving, Improve the hardware on your boat, Other Boat Hardware
Jet Ski Ladder from EZ Riser™ is a flexible 2 boarding step ladder that fits NEWER personal watercraft. Made from the finest American made materials, EZ Riser is a flexible boarding step that fits most personal watercraft. Simply loop the rope through the back “D” clamp, then back through itself securing it to the “D” clamp.
- Installs in seconds,
- No tools required,
- Extremely convenient,
- Stores easily on back “D” clamp.
- Adjustable and transferable,
- No mooring interference,
- UV-treated for long life,
- Can also be used on jet boats,
- 300 pound capacity.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels from the water, you can use it.
Quick View
Cleat Rod Holder Combo
Customize Your Vessel, Improve or add to the rod holders on your boat, Improve the hardware on your boat, Other Boat Hardware, Pop Up and Pull Up Cleats
Keep your Gunnels Free From Extra Hardware! Our Pull Up Six Inch Cleat Rod Holder Combo eliminates the need for two separate installations.
FEATURES
- Made of marine grade 316 stainless steel.
- Saves Room on the gunnel. Eliminates the need for two separate installations.
- 30-degree angle
- 7.57" long, 3.74" wide, 8.38" deep
INSTALLATION
- Fasten with four 1/4" diameter screws (not included).
Quick View
Static Jack Plates
CMC Static Jack Plates
The 2-1/2 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom. It can be used as a stand-alone 2 ½” setback plate or used in conjunction with another manual or hydraulic jack plate to give an additional 2 ½” of setback. Constructed of Extruded 6061-T6 Aluminum alloy. (#65213)
The 7 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom bracket and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 3 ½”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#70012)
The 9 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 5 ¾”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#90012)
All our CMC Static Setback Jack Plates are built of the finest quality materials and made to accept any bolt pattern for ease of installation.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Price range: $148.00 through $439.00
Select options
This product has multiple variants. The options may be chosen on the product page
Quick View
Hydraulic Steering Service and Repair
Maintain or improve your engine, Marine Steering Service, Other Boat Hardware, Repair your steering system
Hydraulic Steering Service and Repair
After you describe your problem below, click "Add to Cart" and fill in all your information as if placing an order. This will send us your name and address info and you can ship us your package with the receipt that you get inside the package in a zip lock bag.
Be sure you wrap your unit in several sealed plastic bags so no oil leakage will occur in shipping. Pack your unit TIGHTLY in the shipping box so it WILL NOT SHIFT IN TRANSIT. We hate to see shafts sticking out of the box upon arrival because someone thought a 10 pound block of aluminum and steel would not break through a cheap cardboard box with no packing material.
Hydraulic Steering Service and Repair
Quick View
Manual Jack Plates
The CMC Manual Jack Plates from Boaters Catalog has comparable design and construction features as the hydraulic lift without the convenience of automated adjustment.
If you desire engine performance enhancement, but don’t have the budget for our hydraulic unit then the ML-65 may be exactly what you are looking for. Our manual units provide similar benefits to the hydraulic units. However, since you cannot raise or lower the engine as you are moving you will not receive the same performance enhancements associated with a hydraulic unit.
The 4 and 5-1/2 inch set back plates are rated for V-6 and smaller motors. They are NOT designed for V-8 or racing applications.
Manual ML-65HD, item#65512 rated for V8 400HP outboards or smaller.
(See description below for transom washer plates and wedges.)
See all our quality CMC products for your outboard here.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Price range: $288.00 through $728.00
Select options
This product has multiple variants. The options may be chosen on the product page
