Total:
$647.04
The Minnow from Boaters Catalog installs in minutes with just a screwdriver. It will provide directional assistance whenever it is in the water. The steering response is improved when using thrust or when using another motor for propulsion. If fishing conditions require drifting and working the current while stalking the ‘Elusive Lunker’ the minnow will add stability and limit wind effect. Fight the fish, not your boat. Tested and proven effective by Northwest fishermen.
BENEFITS
FEATURES
Quick View
Jet Ski Ladder from EZ Riser™ is a flexible 2 boarding step ladder that fits NEWER personal watercraft. Made from the finest American made materials, 
EZ Riser is a flexible boarding step that fits most personal watercraft. Simply loop the rope through the back “D” clamp, then back through itself securing it to the “D” clamp.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
Quick View
CMC Static Jack Plates
The 2-1/2 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom. It can be used as a stand-alone 2 ½” setback plate or used in conjunction with another manual or hydraulic jack plate to give an additional 2 ½” of setback. Constructed of Extruded 6061-T6 Aluminum alloy. (#65213)
The 7 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom bracket and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 3 ½”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#70012)
The 9 INCH CMC Static Setback Jack Plate has 1 ½” of height adjustment at the transom and 1” of height adjustment on the motor bracket. The dimension from the top of the transom to the top of the motor side is 5 ¾”. Constructed of Extruded 6061-T6 Aluminum alloy and stainless steel fasteners. (#90012)
All our CMC Static Setback Jack Plates are built of the finest quality materials and made to accept any bolt pattern for ease of installation.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Quick View
The Dolphin Trolling Fin from Boaters Catalog gives you an edge on the water by providing exceptional tracking in wind and turbulent conditions. The Fin triples the effective rudder area which improves your stability, increases your ability to turn and reduces the cycle time on your auto-pilot system. The Dolphin-Trolling Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to cavitation plate using included hardware. Tested and approved by Alaska and Northwest fishing guides.
Recommended for motors less than 79 Horsepower with up to a 12" Diameter Prop
Quick View
The CMC PT-130 Tilt and Trim for up to 130 HP from Boaters Catalog allows you to tuck your motor in to get your boat on plane smoother and faster. When you’re underway, you can change the angle of your motor to obtain the best performance for your load and water conditions. It gives you a more stable ride, increases top end speed, allows more prop clearance, and better fuel economy.You Get Power Tilt & Trim, Better Boat Handling, More Speed, Lower Fuel Consumption and No More Back Strain!
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
See all our quality CMC products for your outboard here.
Quick View
All-in-one, customizable Boat Tool Holder from Boaters Catalog for lures, pliers, knives, hook extractor, and cup holder.
Customize the Snap-N-Trac the way you want! 3 different designs with the one kit.
Lay the pieces out any way you like. Simply attach the trac then snap in the pieces in the design you prefer.
Can be installed where other systems cannot!
Add more kits to hold more stuf!
Quick View
This dependable, self contained, and water proof CMC Hydraulic Jack Plate from Boaters Catalog has a maximum lifting capacity of 7,853 pounds of thrust. You will have no problem lifting even a V-6 300 hp max. motor at full throttle. The hydraulic actuator is mounted inside the structure of the Power-Lift, yet it is fully accessible without removing the engine. There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks.
The catalog cannot determine freight accurately. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Quick View
The CMC Static Jack Plate 5 inch vertical outboard motor extension allows the motor to be mounted 5 inches higher than the standard mounting height on the transom.
It is a must for easy conversion from prop drive to jet drive.
Another application includes mounting the 5 inch vertical extension on a hydraulic jack plate to raise the motor higher on shallow running boats that are equipped with tunnel extensions.
Constructed of Extruded 6061-T6 Aluminum alloy. (#50012) They are 5” wide and 20-1/2” long. It is rated for 300 HP and smaller motors.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Quick View
Hydraulic Steering Service and Repair
After you describe your problem below, click "Add to Cart" and fill in all your information as if placing an order. This will send us your name and address info and you can ship us your package with the receipt that you get inside the package in a zip lock bag.
Be sure you wrap your unit in several sealed plastic bags so no oil leakage will occur in shipping. Pack your unit TIGHTLY in the shipping box so it WILL NOT SHIFT IN TRANSIT. We hate to see shafts sticking out of the box upon arrival because someone thought a 10 pound block of aluminum and steel would not break through a cheap cardboard box with no packing material.
Hydraulic Steering Service and Repair
Quick View
The Orca Heavy Duty Performance Fin from Boaters Catalog triples the effective rudder area providing a tighter turn radius and sharp crisp directional control at any speed. The larger surface area of the Orca Heavy Duty Performance Fin blocks cavitation better than hydrofoils while adding the benefit of enhanced slow speed maneuvering and heading control. The Orca Heavy Duty Performance Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to the cavitation plate using included hardware.
The Orca fin is usually mounted with the fins down but may be installed fins up without modification if you desire less aggressive control. Used and tested on fishing boats, runabouts, pontoon boats, cruisers, ski boats and bass boats over 250 HP.
Quick View
Our Troll Plate Fin from Boaters Catalog will give you the control and stability that you've been missing. Uncle Norm’s Troll Plate Fins triples the effective rudder area giving you powerful directional control at very slow speeds and adds crisp responsiveness at any speed. Fins on trolling plates are a great help tracking on course when trolling during windy conditions or in current. Included are 2 fins that bolt onto your troll plate. Troll plate is not included.
Important Information...
Online Policies
International Sales
Shipping and Returns
Your Privacy Matters
Talk to Us!
100% Satisfaction Guaranteed!
Boater’s Catalog
6240 105th Terrace N.
Pinellas Park, FL 33782
Tel: (800) 745-0765
