Product Information
Product code: A-0-45M-minnow-1 Categories: Maintain or improve your engine, Other Boat Hardware, Outboard Engine Fins$127.00
Our Minnow Fin For Trolling Motors from Boaters Catalog is perfect to help you keep your edge while fishing for bass, walleye or other game fish.
Whether you’re battling wind, water currents or the boat’s bobbing, the added 77 square inches of rudder area give roughly 10X the effective control compared to the electric trolling motor alone. The vertical fins increase effectiveness of steering with less power consumption. The horizontal fluke acts like a shock absorber to dampen boat bobbing increasing your comfort and safety.
The Minnow installs in minutes with just a screwdriver. It will provide directional assistance whenever it is in the water. The steering response is improved when using thrust or when using another motor for propulsion. If fishing conditions require drifting and working the current while stalking the ‘Elusive Lunker’ the minnow will add stability and limit wind effect. Fight the fish, not your boat. Tested and proven effective by Northwest fishermen.
Designed for Minn Kota 12v, 24v & 36v trolling motors.
Not intended for use on MotorGuide.
To see more of our quality fins and other products, click here.
Description
Minnow Fin For Trolling Motors
The Minnow from Boaters Catalog installs in minutes with just a screwdriver. It will provide directional assistance whenever it is in the water. The steering response is improved when using thrust or when using another motor for propulsion. If fishing conditions require drifting and working the current while stalking the ‘Elusive Lunker’ the minnow will add stability and limit wind effect. Fight the fish, not your boat. Tested and proven effective by Northwest fishermen.
BENEFITS
- 10X the Steering Control
- 3X the Turn Rate
- 10X the Effective Rudder Area
- Exceptional Tracking in Windy and Turbulent Conditions
- Reduced Cycling of the Autopilot because the steering is more effective.
- Maximizes the thrust of your electric trolling motor.
FEATURES
- Marine Aluminum
- Welded construction
- Fits virtually all modern electric trolling motors
- Simple 5 minute installation with only a screw driver.
- Patent Pending
- Made in the USA
Related Products
Hydrofoil Fin
Our Hydrofoil Fin from Boaters Catalog will add directional control and stability that you've been missing. Uncle Norm’s Hydrofoil Fin triples the effective rudder area giving you powerful directional control at very high speeds and adds crisp, responsiveness at any speed. These fins do not add drag at high speeds but are a great help maneuvering at slow speeds and during docking or trailering the boat. Fins on hydrofoils are a great help tracking on course in windy conditions or in current.
Includes 2 fins that bolt onto your hydrofoil fin.
Hydrofoil is not included.
Through Hull Fittings
Through hull fittings for drains for your pull up or pop up cleats, lifting rings, or other hardware that you don't want to drain inside the boat.
PRODUCT # | DESCRIPTION |
600 | Brass through hull fitting |
601 | Plastic through hull fitting |
602 | Stainless Steel through hull fitting |
- For up to 1/4" thick hulls.
- Available in plastic, stainless steel or brass.
- Thread is 3/8-24.
Aqua Handle
Aqua Handle from EZ Riser™ is a must for passengers riding on a personal watercraft. All Jet Ski passengers, especially women and children, find the Aqua Handle easy to use. It gives them a great level of comfort when riding on the back of a Personal Water Craft.
The Aqua Handle simply clips on one of the back straps of the Drivers Life Vest or attach it to the Seat Strap of the Jet Ski Seat. Once this is done, you're ready to go.
- It's portable, you just unclip it and use it on another ski vest or Jet Ski Strap.
- It's adjustable, you can attach it to any strap of a ski vest, high on the vest for an adult and low for a child, you decide
- Buy 2 or 3 and have them available on all of your ski vests or Jet Skis.
Orca Performance Fin
The Orca Performance Fin from Boaters Catalog triples the effective rudder area providing a tighter turn radius and sharp crisp directional control at any speed. The larger surface area of the Orca Performance Fin blocks cavitation better than hydrofoils while adding the benefit of enhanced slow speed maneuvering and heading control. The Orca-Performance Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to the cavitation plate using included hardware.
The Orca fin is usually mounted with the fins down but may be installed fins up without modification if you desire less aggressive control. Used and tested on fishing boats, runabouts, pontoon boats, cruisers, ski boats and bass boats (over 80 HP) since 2002.
The New Orca Heavy Duty Fin for outboards over 250 HP is now available, click here.
Jet Ski Ladder
Jet Ski Ladder from EZ Riser™ is a flexible 2 boarding step ladder that fits NEWER personal watercraft. Made from the finest American made materials, EZ Riser is a flexible boarding step that fits most personal watercraft. Simply loop the rope through the back “D” clamp, then back through itself securing it to the “D” clamp.
- Installs in seconds,
- No tools required,
- Extremely convenient,
- Stores easily on back “D” clamp.
- Adjustable and transferable,
- No mooring interference,
- UV-treated for long life,
- Can also be used on jet boats,
- 300 pound capacity.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels from the water, you can use it.
Boat Tool Holder
All-in-one, customizable Boat Tool Holder from Boaters Catalog for lures, pliers, knives, hook extractor, and cup holder.
Customize the Snap-N-Trac the way you want! 3 different designs with the one kit.
Lay the pieces out any way you like. Simply attach the trac then snap in the pieces in the design you prefer.
Can be installed where other systems cannot!
Add more kits to hold more stuf!
Dolphin Trolling Fin
The Dolphin Trolling Fin from Boaters Catalog gives you an edge on the water by providing exceptional tracking in wind and turbulent conditions. The Fin triples the effective rudder area which improves your stability, increases your ability to turn and reduces the cycle time on your auto-pilot system. The Dolphin-Trolling Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to cavitation plate using included hardware. Tested and approved by Alaska and Northwest fishing guides.
Recommended for motors less than 79 Horsepower with up to a 12" Diameter Prop
Engine Control Service
To properly service your Hydraulic Engine and Transmission Control Maintenance and Service contact Boaters Catalog at 800-745-0765 or fill in your information here to send your units to us.
Teleflex/Morse / Hynautic is the world’s largest manufacturer of marine hydraulic controls
- Proven performance and reliability for over 30 years
- Dependable control for luxury cruisers, workboats and commercial fishing boats
- Nothing moves boats better a hydraulic control is a liquid link between a sender and an actuator
- Provides pure energy in motion without friction, without backlash, no lost motion up to four stations is possible depending on length of tubing run
- Unique and highly accepted feel
- Simple installation
PT130 Tilt and Trim
The CMC PT-130 Tilt and Trim for up to 130 HP from Boaters Catalog allows you to tuck your motor in to get your boat on plane smoother and faster. When you’re underway, you can change the angle of your motor to obtain the best performance for your load and water conditions. It gives you a more stable ride, increases top end speed, allows more prop clearance, and better fuel economy.
Electric Hydraulic Tilt & Trim
You Get Power Tilt & Trim, Better Boat Handling, More Speed, Lower Fuel Consumption and No More Back Strain!
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
See all our quality CMC products for your outboard here.
Hydraulic Jack Plate for 400HP
The CMC HD Hydraulic Jack Plate PL-65HD Power-Lift from Boaters Catalog is designed for 400 HP outboard motors. The PL-65HD is made of 6061 T6 aluminum alloy extrusions and fastened with stainless steel fasteners for maximum strength and durability. The structure incorporates a patented roller design providing less friction, longer wear, less maintenance and virtually eliminates any chance of binding.
The self-contained and water proof electric hydraulic power unit and cylinder is embodied into one actuator inside the structure of the Power-Lift and includes its own fluid reservoir. Providing a lifting capacity of 7853 lbs of thrust, it has no problem lifting a 400 HP motor at full speed.
The CMC HD Hydraulic Jack Plate is made of 100% non-ferrous material which makes it more impervious to salt and fresh water. This design eliminates the need to install a hydraulic tank, motor, pump and hoses inside the boat saving the boat room where needed. It comes full of fluid, tested and ready for operation.
(See below for a description of transom wedges and washer plates.)
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
See all our quality CMC products for your outboard motor here.