Product Information
Product code: A-0-45M-minnow-1 Categories: Maintain or improve your engine, Other Boat Hardware, Outboard Engine Fins$127.00
Our Minnow Fin For Trolling Motors from Boaters Catalog is perfect to help you keep your edge while fishing for bass, walleye or other game fish.
Whether you’re battling wind, water currents or the boat’s bobbing, the added 77 square inches of rudder area give roughly 10X the effective control compared to the electric trolling motor alone. The vertical fins increase effectiveness of steering with less power consumption. The horizontal fluke acts like a shock absorber to dampen boat bobbing increasing your comfort and safety.
The Minnow installs in minutes with just a screwdriver. It will provide directional assistance whenever it is in the water. The steering response is improved when using thrust or when using another motor for propulsion. If fishing conditions require drifting and working the current while stalking the ‘Elusive Lunker’ the minnow will add stability and limit wind effect. Fight the fish, not your boat. Tested and proven effective by Northwest fishermen.
Designed for Minn Kota 12v, 24v & 36v trolling motors.
Not intended for use on MotorGuide.
To see more of our quality fins and other products, click here.
Description
Minnow Fin For Trolling Motors
The Minnow from Boaters Catalog installs in minutes with just a screwdriver. It will provide directional assistance whenever it is in the water. The steering response is improved when using thrust or when using another motor for propulsion. If fishing conditions require drifting and working the current while stalking the ‘Elusive Lunker’ the minnow will add stability and limit wind effect. Fight the fish, not your boat. Tested and proven effective by Northwest fishermen.
BENEFITS
- 10X the Steering Control
- 3X the Turn Rate
- 10X the Effective Rudder Area
- Exceptional Tracking in Windy and Turbulent Conditions
- Reduced Cycling of the Autopilot because the steering is more effective.
- Maximizes the thrust of your electric trolling motor.
FEATURES
- Marine Aluminum
- Welded construction
- Fits virtually all modern electric trolling motors
- Simple 5 minute installation with only a screw driver.
- Patent Pending
- Made in the USA
Related Products
Engine Control Service
To properly service your Hydraulic Engine and Transmission Control Maintenance and Service contact Boaters Catalog at 800-745-0765 or fill in your information here to send your units to us.
Teleflex/Morse / Hynautic is the world’s largest manufacturer of marine hydraulic controls
- Proven performance and reliability for over 30 years
- Dependable control for luxury cruisers, workboats and commercial fishing boats
- Nothing moves boats better a hydraulic control is a liquid link between a sender and an actuator
- Provides pure energy in motion without friction, without backlash, no lost motion up to four stations is possible depending on length of tubing run
- Unique and highly accepted feel
- Simple installation
Boat Tool Holder
All-in-one, customizable Boat Tool Holder from Boaters Catalog for lures, pliers, knives, hook extractor, and cup holder.
Customize the Snap-N-Trac the way you want! 3 different designs with the one kit.
Lay the pieces out any way you like. Simply attach the trac then snap in the pieces in the design you prefer.
Can be installed where other systems cannot!
Add more kits to hold more stuf!
Jet Ski Ladder
Jet Ski Ladder from EZ Riser™ is a flexible 2 boarding step ladder that fits NEWER personal watercraft. Made from the finest American made materials, EZ Riser is a flexible boarding step that fits most personal watercraft. Simply loop the rope through the back “D” clamp, then back through itself securing it to the “D” clamp.
- Installs in seconds,
- No tools required,
- Extremely convenient,
- Stores easily on back “D” clamp.
- Adjustable and transferable,
- No mooring interference,
- UV-treated for long life,
- Can also be used on jet boats,
- 300 pound capacity.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels from the water, you can use it.
Troll Plate Fin
Our Troll Plate Fin from Boaters Catalog will give you the control and stability that you've been missing. Uncle Norm’s Troll Plate Fins triples the effective rudder area giving you powerful directional control at very slow speeds and adds crisp responsiveness at any speed. Fins on trolling plates are a great help tracking on course when trolling during windy conditions or in current. Included are 2 fins that bolt onto your troll plate. Troll plate is not included.
Flexible Boarding Ladder
The Flexible Boarding Ladder from Boaters Catalog is the ideal solution for getting on your boat after a swim or helping someone else easily get on to your boat.
The issue: you have either fallen in the water or you decide to take a dip, how do you re-board your BOAT? As an example we'll take a Bass Boat. without a Bass Boat Ladder you will find it very difficult to enter your Bass Boat.
The answer: You re-board with the cost effective Bass Boat Ladder known as the Flexible Boarding Ladder by EZ Riser™.
The EZ Riser FBL is designed for many boats but especially as a BASS BOAT LADDER. As an owner of a Bass Boat, if you don't have a fixed ladder, then the EZ Riser BASS BOAT LADDER is your answer.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels you can use it.
Tie Down and Ski Tow
Flush Mounted Tie Down and Ski Tow
Tie Down Features
- May be used anywhere equipment must be secured to the deck-e.g. poling platform, scuba gear, fenders, etc.
- Large size (#195) is also ideal for docks; small size (#196) is ideal for personal watercraft.
- Made of cast stainless steel.
- Assembly consists of main body and sealing cup.
- Keeps the transform clear of protruding ski tows.
- Four piece patented assembly consists of main body, sealing cup, backing plate and gasket.
Cleat Rod Holder Combo
Keep your Gunnels Free From Extra Hardware! Our Pull Up Six Inch Cleat Rod Holder Combo eliminates the need for two separate installations.
FEATURES
- Made of marine grade 316 stainless steel.
- Saves Room on the gunnel. Eliminates the need for two separate installations.
- 30-degree angle
- 7.57" long, 3.74" wide, 8.38" deep
INSTALLATION
- Fasten with four 1/4" diameter screws (not included).
Hydrofoil Fin
Our Hydrofoil Fin from Boaters Catalog will add directional control and stability that you've been missing. Uncle Norm’s Hydrofoil Fin triples the effective rudder area giving you powerful directional control at very high speeds and adds crisp, responsiveness at any speed. These fins do not add drag at high speeds but are a great help maneuvering at slow speeds and during docking or trailering the boat. Fins on hydrofoils are a great help tracking on course in windy conditions or in current.
Includes 2 fins that bolt onto your hydrofoil fin.
Hydrofoil is not included.
Orca Performance Fin
The Orca Performance Fin from Boaters Catalog triples the effective rudder area providing a tighter turn radius and sharp crisp directional control at any speed. The larger surface area of the Orca Performance Fin blocks cavitation better than hydrofoils while adding the benefit of enhanced slow speed maneuvering and heading control. The Orca-Performance Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to the cavitation plate using included hardware.
The Orca fin is usually mounted with the fins down but may be installed fins up without modification if you desire less aggressive control. Used and tested on fishing boats, runabouts, pontoon boats, cruisers, ski boats and bass boats (over 80 HP) since 2002.
The New Orca Heavy Duty Fin for outboards over 250 HP is now available, click here.
Hydraulic Steering Service and Repair
Hydraulic Steering Service and Repair
After you describe your problem below, click "Add to Cart" and fill in all your information as if placing an order. This will send us your name and address info and you can ship us your package with the receipt that you get inside the package in a zip lock bag.
Be sure you wrap your unit in several sealed plastic bags so no oil leakage will occur in shipping. Pack your unit TIGHTLY in the shipping box so it WILL NOT SHIFT IN TRANSIT. We hate to see shafts sticking out of the box upon arrival because someone thought a 10 pound block of aluminum and steel would not break through a cheap cardboard box with no packing material.
Hydraulic Steering Service and Repair