Dock Line Supports
Dock Line Supports from Boaters Catalog attach to pilings using nails or spikes. Prevents dock lines from falling to bottom of pilings or in the water and creates convenient holder for lines when boat leaves the dock. Makes docking easier when using a boat hook to grab your lines.
Our hangers are made from #1 grade pressure-treated Southern Yellow Pine or High Density Polyethylene recycled plastic. (color white shown is not available at this time)
Installs easily onto piling with nails or lag screws.
Length - 12".
Routed edges provide a smooth finish to prevent chafing of the lines.
Dock Swing Ladder
The Dock Swing Ladder from Boaters Catalog has the same great features as the Straight Ladder but can be stored and secured up and out of the water (90º) with a quick release pin.
The ladder has a fixed s/s bolt through the ladder which pivots in a self-lubricating brass bushing installed in the bracket for maximum wear.
Perfect for keeping side rails and steps clean.
Available in 3, 4, 5, 6, and 7 step.
Capacity is 500+ lbs..
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Dockside Electrical Pillars
Standard Dockside Electrical Pillars from Boaters Catalog
Standard Features
- Dimensions: 8" x 8" x 41"(Height)
- Casing: Maximum six receptacles (9 poles)
- Extruded aluminum 6063 with 3/16" wall thickness
- Welded base for extra strength
- All stainless steel fasteners with nylon washers
- Isolation plate to separate water, telephone and TV from "electrical" (completely waterproof)
- Each receptacle protected by a thermal magnetic circuit breaker
- Marine grade electrical receptacles are available in 20 amp duplex GFI and 20, 30 & 50 amp twist-lock , 100 amp single & three phase - pin and sleeve
- Electrical distribution block - direct feed
- Plastic three sided lenses
- Cone top
- Powder coated white
- 15 year unconditional warranty on structural integrity of casing
- Listed by qualified testing agency
Options
- Power block - loop feed (stud) - maximum wire size 500 MCM cable
- TV/telephone receptacle
- PL-9 fluorescent light & photo cell
- Thermo plastic receptacle covers
- Aluminum covers with receptacle mounted on a 45° down angle and back lighted.
- Electric meters
- Water meters with locking ball valves available on 45" unit
- 45" height
- Hose holders / cable brackets
- European power receptacles
- Custom pillar available
Call us for a quote on the stand options you need at: 1-800-745-0765
All our dockside electrical pillars are built to order and can take from 2-4 weeks for manufacture from date of order.
Dockside Lighting
Our Dockside Lighting from Boaters Catalog is perfect for lighting paths to the dock, keeping your guests safe while on the dock, security lighting, and simply making your dock look good at night.
- Free standing or post mounted
- Distributes light through plastic windows (360 degree light)
- All aluminum casing
- Powder coated finish
- Economical fluorescent tube
- Designed and manufactured for use in a corrosive salt water environment
- Listed by qualified testing agency
The shopping cart will not add freight to your order. We will call you with your shipping costs after your order has been received.
- The LBC-BELL is 6x6x12 and mounts on top of a piling or post
- The LBB-36 is 6x6x36 inches high and is free standing
- The LBB-41 is 8x8x41 inches high and is free standing
Dolphin Trolling Fin
The Dolphin Trolling Fin from Boaters Catalog gives you an edge on the water by providing exceptional tracking in wind and turbulent conditions. The Fin triples the effective rudder area which improves your stability, increases your ability to turn and reduces the cycle time on your auto-pilot system. The Dolphin-Trolling Fin installs in minutes without drilling using the 45M-Clamp kit or bolt directly to cavitation plate using included hardware. Tested and approved by Alaska and Northwest fishing guides.
Recommended for motors less than 79 Horsepower with up to a 12" Diameter Prop
Economy Boarding Step
Our Economy Boarding Step from Boaters Catalog is a single fiberglass cockpit step with non-skid surface, 12 inches high with handles on both sides.
Measures W 22" x H 12" x D 17"
Wt 14lb
There is a lead time of 11 weeks on all fiberglass items
You may call for more information 800-745-0765 for the Economy Boarding Step
Economy Leaning Post
Our Economy Leaning Post from Boaters Catalog is a great upgrade for any size center console boat. A cooler or bait well can be stored on the deck under the seat.(Holds up to a 90 qt. cooler)
It has a white powder coat finish and an all aluminum welded frame. Cooler storage area under seat (hold up to 90 qt. cooler). Marine grade vinyl upholstery. Stands 34" high x 38" Wide. 18" x 3" mounting plates. Powder coating process warrantied for 6 months.
- 34"H x 38"W with an 18" x 3" mounting plate
- Standard leaning post with no rod holders
- White powder coated finish, all aluminum welded frame
- Cooler storage area under seat (hold up to 90 qt. cooler)
Electric Compact Dehumidifier 1100
The Electric Compact Dehumidifier 1100 from Boaters Catalog is a mini-capacity, electric petite compact dehumidifier. The unit works in areas of the home, boat or RV that are up to 1,100 cubic feet. It's effectiveness is measured in gathering approximately 8 oz. of water per day at 86° F and 80% R.H.
Additional specifications of the EDV1100 includes: a power adapter of 9V DC 2.5AMP, power consumption of 22.5W, 16 oz. capacity removable water tank and an automatic water level detector switch to indicate tank is full. The unit measures 6"L x 4 ½"W x 8 ½"H
110V AC Standard Power Cord Included
The Eva-Dry 1100 is equipped with a standard
110V power supply.
Epaulet Short Sleeve Shirt
Also available in TALL 16 1/2, 17 1/2, & 18 1/2
Color: WhiteYour name or boat name can be embroidered above the left pocket for $12 per item.See more of our quality mariner's gear here.
Epaulet Sweater
The Epaulet Sweater is a must-have garment for mariners seeking both style and functionality. Crafted with meticulous attention to detail, this sweater features distinct epaulets on the shoulders, adding a touch of sophistication to your maritime ensemble. Made from high-quality materials, it offers exceptional durability and comfort, ensuring it withstands the demands of life at sea. The formal design of the Epaulet Sweater exudes elegance and professionalism, making it suitable for a range of occasions both on and off the water. Elevate your maritime wardrobe with this timeless piece that effortlessly combines practicality and style.
Our Sweater from Boaters Catalog is made to Military specifications with V-neck, epaulets, elbow and shoulder patches.
It is 100% acrylic, jersey knit.
Color: Black
Epaulets with Anchor
Our soft Epaulets with Anchor insignia from Boaters Catalog are for the traditional Mariner's uniform and are soft slip-ons, manufactured to applicable government specifications.
Gold anchor and stripes on black background.
One pair per package.
Epaulets with Crescent Moon
Our Epaulets with Crescent Moon from Boaters Catalog are for the traditional Mariner's uniform. They are soft slip-ons, manufactured to applicable government specifications.
Customarily used for Merchant Marine Stewards Department and support staff, Chef/Steward/Stewardess.
Silver Crescent Moon and Stripes on a Black background
One pair per package.
Epaulets with Fork and Knife
Our Epaulets with Fork and Knife from Boaters Catalog are for the traditional Mariner's uniform. They are soft slip-ons, manufactured to applicable government specifications.
Customarily used for Chef/Steward/Stewardess.
Silver Fork/Knife and Stripes on a Black background
One pair per package.
Epaulets with Propeller
Our Epaulets with Propeller from Boaters Catalog are for the traditional Mariner's uniform. They are soft slip-ons, manufactured to applicable government specifications.
Customarily used for Engineering ranks.
Gold propeller and stripes on black background.
One pair per package.
Fiberglass Fish Cleaning Station
Captain Charlie's Fiberglass Fish Cleaning Station from Boaters Catalog is constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and powder coated for a clean finish. All fasteners are 316 grade stainless steel.
(Some of our images show optional add-ons such as hose holders, water bibbs, oval sink and drain, 110 GFI Duplex power outlet. Call 1-800-745-0765 for options pricing.)
This unit comes standard with knife, plier and drink holder
There is an 11-15 week lead time for all fiberglass at this time.
Fiberglass Ice Chests
Our Frigid-Rigid Fiberglass Ice Chests from Boaters Catalog are designed to keep contents cold for days or even weeks in any type of environment. These ice chests are built with superior insulation, airtight lids, weatherproof materials, and are tough enough for heavy commercial use.
Frigid Rigid is the only fiberglass cooler made in the USA. These ice chests are built to withstand years of rugged, outdoor exposure and are unaffected by sun or salt spray.
Frigid Rigid also offers ice chests with set back lids. The set back lid was designed so that you can open the ice chest fully without having to move it away from a wall first.
The Frigid-Rigid Ice Chests are special order only and there is a manufacturing lead time.close
Special Shipping Information...
This item cannot be shipped outside the Continental United States. This item might not ship via UPS and freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight to your order. We will call you with your shipping costs after your order has been received or you may call us at 800-745-0765 for a quote.
Fiberglass Live Wells
These high quality fiberglass tanks are gel coated inside and out with a white finish outside and a blue finish inside to help keep the bait calm. The Standard tanks have a white lid for easy dipping of bait.
All our wells have no holes for water in or out so they can be custom installed on your boat with the plumbing at the correct height. They do include a drain at the bottom of the tank.
Our Heavy Water tanks are built with additional lay-ups of fiberglass and have a square clear top with stainless steel hardware.
- 30 gal. 20.5" H x 19.5" diameter
- 40 gal. 21" H x 23" diameter
- 50 gal. 24" H x 26" diameter
- 80 gal. 29.5"H x 29"W
- 100 gal. 33" H x 33.5" diameter
There is an 11 week lead time on fiberglass items at this time.
This item cannot be shipped outside the Continental United States. This item can not ship via UPS and freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight to your order. We will call you with your shipping costs after your order has been received.
close
You may call us at 800-745-0765 for a quote.
Fiberglass Tackle Center
Our Fiberglass Tackle Center from Boaters Catalog comes from Frigid Rigid who manufactures the world’s finest quality ice chests. The “Tackle Center” merges all the advantages of a 100 quart cooler; capable of keeping ice for up to 2 weeks, with a six drawer, fully enclosed tackle center mounted on the “set-back” portion of the top of the cooler.
This exceptionally practical unit is designed to organize all your tackle, as well as function as the world’s finest quality ice chest.
The Frigid-Rigid Tackle Center is special order only and there is a manufacturing lead time.close
Special Shipping Information...
This item cannot be shipped outside the Continental United States. This item might not ship via UPS and freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight to your order. We will call you with your shipping costs after your order has been received or you may call 800-745-0765.
Fin For Trolling Motors
Our Minnow Fin For Trolling Motors from Boaters Catalog is perfect to help you keep your edge while fishing for bass, walleye or other game fish.
Whether you’re battling wind, water currents or the boat’s bobbing, the added 77 square inches of rudder area give roughly 10X the effective control compared to the electric trolling motor alone. The vertical fins increase effectiveness of steering with less power consumption. The horizontal fluke acts like a shock absorber to dampen boat bobbing increasing your comfort and safety.
The Minnow installs in minutes with just a screwdriver. It will provide directional assistance whenever it is in the water. The steering response is improved when using thrust or when using another motor for propulsion. If fishing conditions require drifting and working the current while stalking the ‘Elusive Lunker’ the minnow will add stability and limit wind effect. Fight the fish, not your boat. Tested and proven effective by Northwest fishermen.
Designed for Minn Kota 12v, 24v & 36v trolling motors.
Not intended for use on MotorGuide.
To see more of our quality fins and other products, click here.
Finger Pier Ladder
Captain Charlie's Wide Tread Finger Pier Straight Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
4" wide step
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread finger pier straight ladder at this time, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Finger Pier Lift Ladder
Captain Charlie's Finger Pier Lift Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Finger Pier Lift Ladder
Captain Charlie's Wide Tread Finger Pier Lift Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto the dock.
4" wide step
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread finger pier lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Finger Pier Straight Ladder
Captain Charlie's Finger Pier Straight Ladder from Boaters Catalog has no "Hoop Handles", only straight upper handles to give a minimal 6 inch intrusion onto dock.
Comes in 3, 4, 5, 6, or 7 step models and like all our ladders, is rated for more than 500 pounds.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
Fish Cleaning Station Options
Our fish cleaning station options from Boaters Catalog are high quality to match our fish cleaning tables.
- Stainless Steel Oval Sink and Drain
- Aluminum Hose Holder
- SS Water Bibb
- 110 GFI Duplex Power Outlet
- Umbrella Holders
- T-Top - Your Choice of Sunbrella Material
Call 1-800-745-0765 for pricing.
Fish-n-Mate Fishing Cart
HERE IT IS, THE ORIGINAL Fish-n-Mate Fishing Cart from Boaters Catalog for the bridge, pier, dock, bank or beach fisherman! It will hold a 48 to 72 qt cooler and eight fishing rods and reels. No more back and forth trips to the parking lot or through the woods for gear and tackle. Plenty of room on board for your tackle box, bait bucket, fishing tools and lunch for the crew.
Add our bucket holder that mounts in one of your rod tubes and you can haul a five gallon bucket or live bait aerator right to your fishing hole, fresh or salt water!
Add our Cutting Board and Basket to keep all your bait ready to use.(shown)
Fish-n-Mate jr Fishing Cart
This Fish-n-Mate jr Fishing Cart from Boaters Catalog is GREAT for the bridge, pier, dock, bank or beach fisherman! It will hold a 36 to 48 qt cooler and five fishing rods and reels. No more back and forth trips to the parking lot or through the woods for gear and tackle. You can strap your tackle box to the top of the cooler, or use a smaller cooler that will let your tackle box fit inside the cart. This cart breaks down for those tight loads and weighs only 19 lbs.
Add our bucket holder that mounts in one of your rod tubes and you can haul a five gallon bucket or live bait aerator right to your fishing hole, fresh or salt water!
Add our cutting board and basket for easy bait prep, and it's easily removable.
Fish-n-Mate Mini Cart
This Fish-n-Mate Mini Cart from Boaters Catalog is GREAT for the bridge, pier, dock, bank or beach fisherman on a tight budget! It will hold a 40 to 48 qt cooler and four fishing rods and reels. No more back and forth trips to the parking lot or through the woods for gear and tackle. You can strap your tackle box to the top of the cooler, or use a smaller cooler that will let your tackle box fit inside the cart.
Add our bucket holder that mounts in one of your rod tubes and you can haul a five gallon bucket or live bait aerator right to your fishing hole, fresh or salt water!
Fishing Cart
A Fisherman's Best Friend! Lil' Mate Fishing Cart
- 4 Rod-Holders
- 54 Quart Cooler Capacity
- 10" Pneumatic Rubber Tires
- Satin Chrome Finish
- Total Weight 13 lbs
- inside frame 7"X14.5"X26.5"
- outside frame 9"X18"X28"
- outside frame 15"X24"X29" (with wheels mounted/handle removed)
Cooler shown NOT included.
This item's freight cannot be calculated by the shopping cart and you will be notified of the freight cost prior to shipping, or you may e-mail us your address and the item you wish to order and we will respond with the freight amount for you.
See more of our quality carts here.
Fishing Cart Bicycle Hitch
Our Fishing Cart Bicycle Hitch from Boaters Catalog is an anodized aluminum unit for either the Fish-N-Mate or the Fish-N-Mate Jr. carts.
A stabilizer bar to secure movement in the hitch is included. The product easily adapts to a 2" receiver hitch front or rear. A lockable hitch pin is recommended but not included.
The bicycle hitch is designed to transport the Fish-N-Mate carts with your bicycle. This all aluminum device easily mounts to the seat post of your bike. An adjustable bracket is provided for different size seat posts.
Cart not included.
Shipping will be quoted by e-mail after the order or you may call 800-745-0765 for a quote.
Weight 17 lbs
Fishing Cart Bucket Holder
Our all tubular aluminum Fishing Cart Bucket Holder from Boaters Catalog will fit nicely into any rod tube around the cart. It is one of the most versatile cart accessories you will find!
- It can be positioned to rotate and lock in position either outside your cart or over your cooler.
- It will haul any standard size 5 gal Bucket or aerator for live bait.
- You can also put a cutting board on top of it for a larger work surface.
Flexible Boarding Ladder
The Flexible Boarding Ladder from Boaters Catalog is the ideal solution for getting on your boat after a swim or helping someone else easily get on to your boat.
The issue: you have either fallen in the water or you decide to take a dip, how do you re-board your BOAT? As an example we'll take a Bass Boat. without a Bass Boat Ladder you will find it very difficult to enter your Bass Boat.
The answer: You re-board with the cost effective Bass Boat Ladder known as the Flexible Boarding Ladder by EZ Riser™.
The EZ Riser FBL is designed for many boats but especially as a BASS BOAT LADDER. As an owner of a Bass Boat, if you don't have a fixed ladder, then the EZ Riser BASS BOAT LADDER is your answer.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels you can use it.
Flexmaster Dock Fender
Our superior Flexmaster Dock Fender from Boaters Catalog is available in black or white.
- Extruded from a special poly vinyl chloride compound
- Black will not mark boat
- Designed to mount to any 2" x 4" or 4" x 4”
Purchase the Flexmaster Fenders by the total number of feet you need. If you need it cut into specific lengths, tell us in the notes at check out what lengths you need.
Click here to order end caps for your Flexmaster Fenders.
All Flexmaster freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight for this product to your order. You may call 800-745-0765 for a quote.
Flexmaster Dock Fender End Caps
Flexmaster Dock Fender End Caps from Boaters catalog are available in black or white to match your fenders. They keep wasps and birds from nesting in the ends of your dock fenders and make them look 'finished' with a clean, professional look. The end caps are molded to fit a 4x4 mount but can be cut for a 2x4 installation.
Flip Up Ladders
Our quality Flip Up Ladders from Boaters Catalog come completely out of the water so no algae or or other growth can occur when not in use.
- Marine grade aluminum construction
- Heavy duty uprights(.060)
- 304 stainless steel fasteners
- Proprietary quick disconnect hardware included(not shown)
- Non-skid steps & square tube
- Flip it up and out of the way
- Stair tread style Flip-It Ladder
Note: Proprietary quick disconnect hardware with this ladder consists of a pair of tie-down eye straps that bolt to the dock and the ladder has connectors that go under the eye straps to hold it in place.(This is NOT the Captain Charlie's quick disconnect that is shown with the Captain Charlie's pipe style ladders)
There may be a lead time on these ladders from the manufacturer.
Shipping will be quoted by e-mail or telephone after order is placed or you may call 800-745-0765.
Floating Dock Lift Ladder
Captain Charlie's Floating Dock Lift Ladder from Boaters Catalog has a fixed portion that extends only 14-1/2inches down from the top of the dock. This means that a 7 step ladder hangs down only 6 feet, a 6 step ladder hangs down only 5 feet etc. All our other ladders extend down the same number of feet as steps.
The Floating Dock Ladder has "Hoop Handles" and can be used with our "Quick Disconnect" option.
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.