Floating Dock Lift Ladder
Captain Charlie's Wide Tread Floating Dock Lift Ladder from Boaters Catalog has a fixed portion that extends only 14-1/2inches down from the top of the dock. This means that a 7 step ladder hangs down only 6 feet, a 6 step ladder hangs down only 5 feet etc. All our other ladders extend down the same number of feet as steps.
The Floating Dock Ladder has "Hoop Handles" and can be used with our "Quick Disconnect" option.
4" wide step
The catalog can not give the correct freight at this time. You may call 800-745-0765 for a quote.
(We do not have a picture of the wide tread floating dock lift ladder, ladder shown is the standard tread but the other pictures show how the wide tread will look with the 4 inch treads)
Flush Mount Top Hinge
Our Quick Release Flush Mount Top Hinge from Boaters Catalog, unlike traditional Bimini top fittings, this hinge’s quick release feature allows the owner to easily remove or install the top without having to keep track of screws and pins. The hinge snaps into the base and stays attached to the Bimini top when the two are separated.
- Flush mounted Quick Release 316 stainless steel hinge.
- Easily remove or install top without having to keep track of screws and pins.
- The hinge snaps into base and stays attached to bimini top when separated.
- Adapter can be inserted four different ways, 90° apart.
Sold by the each
Flush Push Pole Holder
Our Flush Push Pole Holder from Boaters Catalog is the perfect accessory to keep you gunwales clear of line catching protrusion and eliminate trip hazards when the push pole is not on the boat.
Rounded stainless steel plate with black nylon push pole holder.
Pole sits 1 1/16" off of deck--no need for a riser shim under the Push Pole Holder.
Cast 316 stainless steel and UV resistant glass filled nylon construction.
Add the optional waterproofing cup to prevent unwanted water run-off below deck.
Three push pole holders are needed (install middle one facing opposite direction) or two push pole holders and one ring pole holder
Folding Cleats
Our Stainless steel Folding Cleats from Boaters Catalog mount above the deck with studs or nuts and bolts so there are no large holes to drill in your gunwale as with the Pop-Up and Pull-Up style cleats. Simply drill four small holes for the studs and bolt them down from the bottom.
- Mounts on surface of boat. No cut-outs or hole saws required.
- These cleats lock down when not needed, and spring up when release button is pushed in.
- No drain tubes or drain receptacles required. They do not leak into the boat.
- The most simple installation of any retractable cleat in the industry.
- Constructed of marine grade 316 cast S.S. and brightly polished.
- Two styles to choose from: The stud mount (with hidden fasteners) or through bolted (with visible screw holes). Stud length is 1 1/2".
- Great for use on pick-up truck beds as well.
Folding Line Chocks
Our set of Folding Line Chocks from Boaters Catalog keep you gunwale flat and free of obstructions that could catch fishing line or clothing of even be a trip[ hazard when coming aboard or departing.
- Folds down when not in use.
- Marine Grade 316 Stainless Steel
- Surface Mount - no cut-out required.
- Sold in sets of 2
- 4 inch and 6 inch available
See more of our quality boat accessories here.
Folding Push Pole Holder
This folding push pole holder from Boaters Catalog is a must for keeping your push pole mounted on the gunwale and off the deck out of the way when not in use.
-
Folds down when not in use.
-
Surface mount, no cut-outs are necessary.
- Cast 316 stainless steel and UV resistant glass filled nylon construction.
- Use three Push Pole Holders (install middle one in opposite direction).
Foldit Dock Cart
Our Foldit Dock Cart from Boaters Catalog is The Collapsible Cart that’s Big on Hauling And Small on Storage!
Shipping is included in the price
- HAULS UP TO 330 POUNDS
- COMPLETELY RUST AND CORROSION-RESISTANT
- FOLDS FOR EASY STORAGE
- STURDY, ALUMINUM CONSTRUCTION

Proudly Made in the USA
Boaters know the toughest part of boating is usually hauling gear from the car to the boat and then back again. Down ramps, over docks...it’s hard work!
The Foldit marine cart hauls all those cumbersome boating supplies with ease... coolers, skis, anchors, mooring line...you name it.
You’ll spend less time and effort loading and unloading boats and more time on the water! Like the home and garden model, our marine cart weighs just 33 pounds and easily carries 10 times it own weight. The 20" pneumatic tires mean stable, effortless maneuverability with even heavy loads over ramps, docks and uneven terrain. The difference is in the carts extra rugged marine-grade aluminum construction and stainless steel components. That assure complete rust and corrosion protection-even after years of exposure to salt-water spray.
Outside dimensions:
Length - 55", Width - 30-3/4", Depth - 23"
Inside Dimensions:
Length - 38", Width - 22-3/4", Depth - 11-1/2"
Folded Dimensions: 41" Long x 9.5" Wide x 22" Deep
Shipping is included in the price.
Four Leg Cleaning Table
Our economy four leg cleaning table from Boaters Catalog is constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel. (some of our images may show optional add-ons such as hose holders, water bibbs, or pliers and knife holders)
There is no under-shelf on the these models.
Size: 40"W x 23"D x 38"H or 50"W x 23"D x 38"H
*NOTE: All products hand-made to order. Allow 5 weeks lead time.
You may call for a lead time and freight quote - 800-745-0765
Four Leg Fish Cleaning Table
Our Four Leg Fish cleaning Tables from Boaters Catalog are constructed with high quality materials. The cleaning surface is made with 1/2" Marine Grade High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in.
The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel.
(Some of our images show optional add-ons such as hose holders, water bibbs, or pliers and knife holders. Call 1-800-745-0765 for options pricing.)
There is a 4-5 week lead time for all tables.
See more of our quality dock products here.
Four Step Boarding Stairs
This four step boarding stairs from Boaters Catalog are great for home or marina use as well as boat yards and boat dealers. The unit is coated with ultra-violet resistant white gel coat and it has non skid stairs.
42" H x 31" W x 51" D Weight 63 pounds
Unit shown with the aluminum handrail.
This item can not be shipped outside the Continental United States.
Shipping will be quoted after you order or you may call 800-745-0765 for a quote.
*NOTE: All products hand-made to order. Allow 8-10 weeks lead time.
Freezers and Refrigerators
Our Frigid Rigid Freezers and Refrigerators from Boaters Catalog are built with the same quality construction and the same great features as our ice chests! Plus, we’ve added an extra inch of foam polyurethane to our freezer/refrigerator design. The 3 inches of foam polyurethane gives the Frigid Rigid freezer/refrigerator maximum insulation and rigidity.
Our freezers also may be used as a refrigerator! The freezer’s digital thermostat can be reset to allow the unit to operate as either a refrigerator or a freezer. Instructions on how to use the freezer as a refrigerator are included with your freezer.
The Frigid-Rigid Refrigerators / Freezers are special order only and there is a manufacturing lead time.close
Special Shipping Information...
This item cannot be shipped outside the Continental United States. This item might not ship via UPS and freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight to your order. We will call you with your shipping costs after your order has been received or you may call 800-745-0765 for a quote.
Frigid-Rigid Solar Freezers
The Frigid Rigid Solar Freezer from Boaters Catalog is the only portable solar refrigerator/freezer on the market that is engineered to be in the outdoors. In fact, Frigid Rigid 115 AC refrigerator / freezers have been serving the marine saltwater market since 1980. Now that speaks volumes about reliability, dependability and ruggedness.
Frigid Rigid chests are built to withstand years of rugged outdoor use. These Frigid Rigid Solar Refrigerator/Freezers could be used in natural disasters, on farms, in remote campsites, mobile medical clinics and hunting cabins just to name a few.
The Solar Refrigerators use only one solar panel. If you wish the freezer function, you will need two solar panels.close
The Solar Refrigerators / freezers are special order only and there is a manufacturing lead time.close
Special Shipping Information...
This item cannot be shipped outside the Continental United States. This item might not ship via UPS and freight will be quoted by e-mail or telephone at time of purchase. The shopping cart will not add freight to your order. We will call you with your shipping costs after your order has been received or you may call us for a quote at 800-745-0765.
GPS Coordinates
GPS Coordinates has More than 17,100 ACCURATE destination coordinates for GPS. If you have a GPS, you can use the coordinates to lead you to the best marine destinations there are, for reefs, wrecks and fishing holes. The destinations on the CD are geographically correct. Longitudes and Latitudes are included with every coordinate.
Do you have old LORAN-C coordinates that need to be converted to Lat/Lon? This CD is the ONLY ACCURATE conversion system available!
System Requirements: Windows 98 through Windows 10 (in compatibility mode)
Continental US Priority Mail $8.50
- Alaska and Hawaii Priority Mail $12.50
- All other locations call 800-745-0765 for shipping quote
Gunwale Boarding Mat
Our Custom Embroidered Gunwale Boarding Mat from Boaters Catalog is a plush yet durable cover that protects your gunwale from marks and scratches while creating a safe way to board your boat.
- Made from our UV resistant, marine grade carpet material and backed with a non-skid, non-marking rubber that won't deteriorate over time.
- Our Boarding Mat can be customized with your embroidered boat name or other text, adding that personal touch.
- The Gunwale/Sideboard cover is sand weighted with 6 pound sand bag in each side at both ends (Total of 2 with each mat order) to prevent the mat from sliding during boarding or blowing overboard.
- Longest warranty in the Marine Industry EIGHT YEARS Full Warranty on carpet and backing, Our Gunnel Mat is larger than most- check your sizes before purchasing! Total size is 20" x 36" and the custom embroidery covers the 20" width of the mat.
(our mat image shows the 20" width of the mat as it lays over the gunwale)
If you don't want the name of your boat on the mat we can put "Welcome Aboard" or "Boat Shoes Only" or any short phrase of your choosing.
All our mats and carpets are custom cut and embroidered to order. The lead time is appx. 4-6 weeks from the time of your order until it is shipped due to raw materials being held up in shipping.
Half Moon Boarding Mat
Our Custom Embroidered Half Moon Boarding Mat from Boaters Catalog is a plush yet durable cover that protects your deck from marks and scratches while creating a safe way to board your boat. Our mats are seen as door mats around homes as well as on the docks and boats around the country.
- Made from our UV resistant, marine grade carpet material and backed with a non-skid, non-marking rubber that won't deteriorate over time.
- Our Boarding Mat can be customized with your embroidered boat name or other text, adding that personal touch.
- Longest warranty in the Marine Industry EIGHT YEARS Full Warranty on carpet and backing.
Our premium Marine Carpet Boarding Mat an essential accessory for any boating enthusiast . All are made of a plush carpet that is waterproof, stain and fade resistant, mold and mildew resistant, with a non-skid rubber backing. All edges are beautifully finished with matching poly binding. They are available in a wide variety of shapes, colors, and styles. We provide custom embroidery to match.
All our mats and carpets are custom cut and embroidered to order. The lead time is appx. 4-6 weeks from the time of your order until it is shipped due to raw materials being held up in shipping.
If you want more customization just call us at 800-745-0765/
See our other quality boat and dock products here.
Hard Shoulder Boards
Our Hard Shoulder Boards with Anchor insignia from Boaters Catalog are for the traditional Mariner's uniform jacket. They are manufactured to applicable government specifications.
Hard shoulder boards have a Gold anchor and stripes on black background. Available in 3 stripe or 4 stripe.
One pair per package.
Outfit An Entire Crew With Proper Uniform Insignia. Offered as a set of two shoulder board epaulets for both shoulders and designed to slide onto most shirt and jacket epaulets.
Always dress for success and show pride in your profession.
Head Start ChewyHoo
The Head Start ChewyHoo is a soft plastic bait which looks, feels and swims like a real Ballyhoo. This bait features an internal tunnel from the mouth to the anal fin for easy rigging. The one piece eye can pop out for use on the HEAD START.
Chewy-Hoos are catching fish from New England around Cape Horn through the South Pacific and Indian Ocean, in fact, there's nowhere in the world's salt water that Head Start Chewy-Hoo hasn't been catching fish!
Heavy Duty Trailer Dollies
Our Heavy Duty Trailer Dollies from Boaters Catalog have heavy duty casters which makes the Heavy Duty Trailer Dollies very versatile and they can hold trailers, boats, ATVs, and several other types of vehicles, up to 2500 pounds per dolly!
The Heavy Duty Trailer Dollies come in three different sizes: 8", 12", & 16".
The Trailer Dolly is placed under each tire of the vehicle or trailer, making it a rolling cart that will now roll in any direction with ease. The large roller bearing casters make it simple for anyone to move the vehicle or trailer in any direction.
Our Trailer Jack Dolly is a 12"x16" Heavy Duty Dolly with the Trailer Jack Attachment as shown to ease the movement of your boat trailer and save your trailer jack wheel.
Some assembly required, instructions included.
High Speed Hydraulic Power Lift
This dependable, self contained, and water proof High Speed Hydraulic Power Lift from Boaters Catalog has a maximum lifting capacity of 7,853 pounds of thrust. With the CMC High Speed Hydraulic Power-Lift you will have no problem lifting even a V-6 300 hp max. motor at full throttle. The hydraulic actuator is mounted inside the structure of the Power-Lift, yet it is fully accessible without removing the engine. There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks.
The hydraulic actuator is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic tank and hoses inside the boat). It contains a permanent magnet motor for more power and constant torque. The cylinder within the actuator has twice the lifting capacity than other transom jacks on the market. It contains a no-leak seal and wiper that keeps dirt and water out of the working parts. The system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater.
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
Hose Holders
Our quality Hose Holders from Boaters Catalog come in two sizes and are in either natural metal casting for fresh water or powder coated white for much longer life in either fresh or salt water.
- A quality casting of non-corrosive aluminum alloy.
Powder-coating available.
- Large for 100’ or small for 50’ of hose.
See more of our quality dock products here.
Hose Stands
There quality Hose Stands with Hose Holders and Faucets from Boaters Catalog will withstand the weather in both fresh and salt water usage an will help to keep you dock safe from tripping hazards.
- Extruded marine grade aluminum stanchion 3” X 3” with Almag 35 cast aluminum hose
holders
- Powder coated white
- Standard height: 29”
- Standard Base Plate: 5 ½” x 5 ½” with 3/8" mounting holes
- When hose bibb is installed the water line fitting is inside the stand for your water connection
Hydraulic Jack Plate for 400HP
The CMC HD Hydraulic Jack Plate PL-65HD Power-Lift from Boaters Catalog is designed for 400 HP outboard motors. The PL-65HD is made of 6061 T6 aluminum alloy extrusions and fastened with stainless steel fasteners for maximum strength and durability. The structure incorporates a patented roller design providing less friction, longer wear, less maintenance and virtually eliminates any chance of binding.
The self-contained and water proof electric hydraulic power unit and cylinder is embodied into one actuator inside the structure of the Power-Lift and includes its own fluid reservoir. Providing a lifting capacity of 7853 lbs of thrust, it has no problem lifting a 400 HP motor at full speed.
The CMC HD Hydraulic Jack Plate is made of 100% non-ferrous material which makes it more impervious to salt and fresh water. This design eliminates the need to install a hydraulic tank, motor, pump and hoses inside the boat saving the boat room where needed. It comes full of fluid, tested and ready for operation.
(See below for a description of transom wedges and washer plates.)
The catalog cannot determine freight accurately for these products. We will contact you after the sale with the correct freight. If you wish, you may call us at 800-745-0765 for a freight quote prior to ordering.
See all our quality CMC products for your outboard motor here.
Hydraulic Steering Service and Repair
Hydraulic Steering Service and Repair
After you describe your problem below, click "Add to Cart" and fill in all your information as if placing an order. This will send us your name and address info and you can ship us your package with the receipt that you get inside the package in a zip lock bag.
Be sure you wrap your unit in several sealed plastic bags so no oil leakage will occur in shipping. Pack your unit TIGHTLY in the shipping box so it WILL NOT SHIFT IN TRANSIT. We hate to see shafts sticking out of the box upon arrival because someone thought a 10 pound block of aluminum and steel would not break through a cheap cardboard box with no packing material.
Hydraulic Steering Service and Repair
Hydrofoil Fin
Our Hydrofoil Fin from Boaters Catalog will add directional control and stability that you've been missing. Uncle Norm’s Hydrofoil Fin triples the effective rudder area giving you powerful directional control at very high speeds and adds crisp, responsiveness at any speed. These fins do not add drag at high speeds but are a great help maneuvering at slow speeds and during docking or trailering the boat. Fins on hydrofoils are a great help tracking on course in windy conditions or in current.
Includes 2 fins that bolt onto your hydrofoil fin.
Hydrofoil is not included.
Jet Ski Ladder
Jet Ski Ladder from EZ Riser™ is a flexible 2 boarding step ladder that fits NEWER personal watercraft. Made from the finest American made materials, EZ Riser is a flexible boarding step that fits most personal watercraft. Simply loop the rope through the back “D” clamp, then back through itself securing it to the “D” clamp.
- Installs in seconds,
- No tools required,
- Extremely convenient,
- Stores easily on back “D” clamp.
- Adjustable and transferable,
- No mooring interference,
- UV-treated for long life,
- Can also be used on jet boats,
- 300 pound capacity.
Other Boats that use the EZ Riser Flexible Boarding Ladder are:
- Bass Boats... sits on a cleat and ready when you are.
- Walkarounds... just attach it to a cleat and use it when you need it.
- Skiffs... same solution, attach it to a cleat and forget about it.
- Sail Boats... used as an emergency access to a sailboat with no affixed ladder.
- All others... as long as you can reach the gunnels from the water, you can use it.
Large Canvas Tote Bag
Our Large Canvas Tote Bag from Boaters Catalog is heavy-duty canvas with velcro closure, contrasting trim, and key ring. Choose Captain, First Mate, or Crew logo. Measures 21 1/2" x 16" x 7".
Great for a quick overnight bag, tool bag, line bag, etc. Outside pocket and a brass clip hanging inside for small item like a key ring you don't want lose in the bottom of the bag.
Personalize your tote, 13 characters and spaces, with your name or your boat's name for $14.00 in the custom embroidery text box.
See more of our quality captain, mate, and crew gear here.
Large Round Lifting Eye
Our Large Round Lifting Eye from Boaters Catalog is constructed with all stainless steel parts; eye and base are 316, lifting hardware is 304. When not in use it is flush to the deck or gunwale to avoid a trip hazard.
- The sling is a solid casting for increased strength.
- Parts may be purchased separately.
- 3 1/4" diameter hole required.
- Fastens to deck with four 1/4" screws.
Leaning Post 32 inches
Our Economy Leaning Post 32 inches wide from Boater Catalog with no rod holders is a great upgrade for any size center console boat. A cooler or bait well can be stored on the deck under the seat.
It has a white powder coat finish and an all aluminum welded frame.
- Cooler storage area under seat.
- Marine grade vinyl upholstery.
- Stands 34" high x 32" Wide.
- 18" x 3" mounting plates.
- Powder coating process warrantied for 6 months.
- standard leaning post with no rod holders
- White powder coated finish, all aluminum welded frame
This unit stands 34" high x 32" Wide with 18" x 3" mounting plates.
There is a 5 week lead time for this unit. You may call 800-745-0765 for more information.
Leaning Post With Rod Holders
Our Economy Leaning Post With Rod Holders from Boaters Catalog comes with 4 welded on rod holders. It has a white powder coat finish and an all aluminum welded frame. Cooler storage area under seat(hold up to 90 qt. cooler). Marine grade vinyl upholstery. Stands 34" high x 38" Wide. 18" x 3" mounting plates. Powder coating
process warrantied for 6 months.
- 34"H x 38"W 18" x 3" Mounting Plate
There is a lead time for this product. You may call 800-745-0765 for more information.
Leaning Post with Storage
Our Leaning Post with Storage from Boaters Catalog is great for boats 21 to 28 feet long. The unit is 30" High x 38" Wide x 24" Deep with 4 stainless steel rod holders and storage under the seat. There is full storage below with latching doors in the back
(measurements include the flange). The backrest shown in the pictures is an available option.
There is an 11-15 week lead time for all fiberglass at this time.
See our other quality boat products here
Leather Credential Holder
Our USCG License Leather Credential Holder from Boaters Catalog is sized for the passport style Merchant Mariner (License) Credential.
This holder is made of water-resistant smooth leather with the US Coast Guard Licensed logo in gold foil. It will protect your license for years. It also features a plastic pocket which is perfect size for holding your T.W.I.C. card. This holder fits a USCG license issued March 1, 2024 or after.
Check out our licensed captain license plate for your car, our captain's mug, patches for your jackets and much more. We also carry family oriented "captain, first mate, and crew " shirts and hats.
License Waterproof Cover
This USCG Passport and License Waterproof Cover with Waist Belt from Boaters Catalog provides security and convenience of your important documents all in one! The cover is waterproof up to 15 feet and will float if dropped into the water. You can wear this belt around your waist when you don’t want to leave anything behind. This is ideal for securing and protecting your license along with any other important papers.
Each Cover is: 7.25" x 10.5" and belt adjusts to fit up to 46" waist.
Opaque for added security and comes with a 3yr warranty
Click here to see more of our quality captain, first mate, and crew gear
Licensed Captain Attache
Our Licensed Captain Attache from Boaters Catalog is for everyone that needs a great bag for daily living and travel. Our bags are both stylish and functional. Keep important papers in one place. Black Denier Canvas Bag 17"x13"x4", expandable to 6". Embroidered with the USCG Licensed Captain Logo. Various internal pockets, detachable key ring and shoulder strap.
You may personalize your attache with your name or your boat's name, up to 13 letters and spaces.
Check out our licensed captain license plate for your car, our captain's mug, patches for your jackets and much more. We also carry family oriented "captain, first mate, and crew " shirts and hats.